Reeder Custom Guns - Idea

Josh
Idea
Friday, January 03, 2020, 01:10

So if I were to buy a new spindle, .223 sizing button and decamping rod I could technically just switch out the insides of the 240 die and use it.

204 to 240 - Josh, 2020-01-02, 23:55
- I make 257 Raptors in one step with no problems - Blake, 2020-01-03, 07:28
  - ...with fresh new brass, right? - WB, 2020-01-03, 07:52
    - borrowed - Paul, 2020-01-03, 13:09
    - Yes new brass! (nm) - Blake, 2020-01-03, 10:26
- When I was making 6.5 Raptor,,, - Tim Pence, 2020-01-03, 07:14
  - I goofed with annealing, but it causes more problems - WB, 2020-01-03, 07:34
- Idea - Josh, 2020-01-03, 01:10
- They should work, a little lube inside the case neck. - WB, 2020-01-03, 00:17
  - A cue-tip works well. Adjust the .223's only enough - WB, 2020-01-03, 00:20
  - I don’t have any - Josh, 2020-01-03, 00:19
    - NO, a collet sizer will not at all. - WB, 2020-01-03, 00:27
      - Thanks (nm) - Josh, 2020-01-03, 01:03

powered by my little forum