Reeder Custom Guns - I knew the ejector on the frame was

WB
I knew the ejector on the frame was
Saturday, November 12, 2022, 22:09

different on the .45 frames, unique to the 9mm or .38 Super. The extractor I can understand too.

Humorously I run a 9mm Luger barrel (custom made for a Glock 20) on a Glock 21 slide (and SF frame using 10mm Mags) which runs well using a 9 or 11 lb. slide. I forget the actual weight. For plinking it does fine and hits POA for some reason. Back when 9mm was $8/50 I shot quite a bit of it. The "sloppy" Glock extractor works from .45 to 9mm perfectly, ejector knocks everything clear and no dents. Since the slide "hood" cut out is .45 wide all Glock 20 barrels fit and headspace is fine.

With all these 1911 9mm's out there - WB, 2022-11-12, 09:26
- several years back Cylinder and Slide shop offered - jthomson, 2022-11-12, 13:46
- You have to have a 38 Super barrel plus the slide needs to - Gary Reeder, 2022-11-12, 13:24
  - Ignorance is bliss, in my case - steve todd, 2022-11-12, 21:46
    - I knew the ejector on the frame was - WB, 2022-11-12, 22:09
      - Yep, ejector is same for 9mm & 38 Super - steve todd, 2022-11-12, 23:56