If I cast some .510, 350 grain bullets of melted clip on wheel weights, water quenched then gas checked, how do you think they would perform in a .510GNR at about 1050 FPS? should that be hard enough to keep from leading at moderate speed?
-
Question for bullet casters
- MTM, 2017-01-29, 06:37
-
This will be my first try at casting
- MTM, 2017-01-29, 10:25
-
first off, don't listen to that friend anymore.. If
- Gary Reeder, 2017-01-29, 13:44
-
Casting
- MTM, 2017-01-29, 15:07
-
Hey Michael, looks like you on well on your way.
- Mark Conner, 2017-01-29, 16:09
-
Michael, pay attention to what Mark Conner says. he is the
- Gary Reeder, 2017-01-29, 21:17
-
Casting in very cold weather
- MTM, 2017-01-30, 07:14
-
guys that develop their own formula will tell
- Gary Reeder, 2017-01-30, 10:41
- 1 or 2 things to try. - Mark Conner, 2017-01-30, 18:21
-
guys that develop their own formula will tell
- Gary Reeder, 2017-01-30, 10:41
-
Casting in very cold weather
- MTM, 2017-01-30, 07:14
-
Michael, pay attention to what Mark Conner says. he is the
- Gary Reeder, 2017-01-29, 21:17
-
Hey Michael, looks like you on well on your way.
- Mark Conner, 2017-01-29, 16:09
-
Casting
- MTM, 2017-01-29, 15:07
-
first off, don't listen to that friend anymore.. If
- Gary Reeder, 2017-01-29, 13:44
- You would be putting too much effort into them - Jim Taylor, 2017-01-29, 07:12
-
No real need to water quinch them. The temper goes away
- WB, 2017-01-29, 07:07
- Water Quenching - Alcorn, 2017-01-29, 08:47
-
This will be my first try at casting
- MTM, 2017-01-29, 10:25