Reeder Custom Guns - This will be my first try at casting

MTM
This will be my first try at casting
Sunday, January 29, 2017, 10:25

So I'll start with about 50 practice loads, gas checked and lubed. I do not have any Linotype or tin/ anatomy additives to add to this batch, but from what I have heard from a friend that casts, also here, as long as they are moving slow, sized and lubed properly, and gas checked, they should work just fine for practice loads.

Question for bullet casters - MTM, 2017-01-29, 06:37
- This will be my first try at casting - MTM, 2017-01-29, 10:25
  - first off, don't listen to that friend anymore.. If - Gary Reeder, 2017-01-29, 13:44
    - Casting - MTM, 2017-01-29, 15:07
      - Hey Michael, looks like you on well on your way. - Mark Conner, 2017-01-29, 16:09
        Michael, pay attention to what Mark Conner says. he is the - Gary Reeder, 2017-01-29, 21:17
        Casting in very cold weather - MTM, 2017-01-30, 07:14
        guys that develop their own formula will tell - Gary Reeder, 2017-01-30, 10:41
        1 or 2 things to try. - Mark Conner, 2017-01-30, 18:21
- You would be putting too much effort into them - Jim Taylor, 2017-01-29, 07:12
- No real need to water quinch them. The temper goes away - WB, 2017-01-29, 07:07
  - Water Quenching - Alcorn, 2017-01-29, 08:47