Reeder Custom Guns - lots of oil/lube on bolt carrier drippin oil

carl hackney
lots of oil/lube on bolt carrier drippin oil
Friday, February 09, 2018, 12:15

which I have found isn't needed if the gun was assembled right with good parts most of the guys I've run across that say that they have to run it wet are the garage builders using what ever parts they can buy/ find .I've have owned 5 or 6 ars[a Olympic arms and the rest were andersons 2 of them I built from all Anderson parts] and have lubed them lightly .just a thin flim of good grease on the bolt and a couple drops of good gun oil on the bout carrier.

? for all you AR DI shooters. Since I am a novice to this, - SPB, 2018-02-09, 11:59
- the internet wizards are actually internet idiots - Gary Reeder, 2018-02-09, 12:24
  - Ok, so a wipe down with CLP or similar, and a bit of grease - SPB, 2018-02-09, 12:51
    - I wouldn't use CLP unless you live in south Florida - Gary Reeder, 2018-02-09, 13:27
      - Good to know. Thank you Gary. (nm) - SPB, 2018-02-09, 13:33
- lots of oil/lube on bolt carrier drippin oil - carl hackney, 2018-02-09, 12:15
- I'M GUESSING KEEP IT OILED (nm) - JT, 2018-02-09, 12:06
  - Agree, just trying to understand how wet? (nm) - SPB, 2018-02-09, 12:18
    - Some guys put fluid in the supressors - WB, 2018-02-09, 14:07
      - Browning developed the 1917 A1 water cooled machine gun - Gary Reeder, 2018-02-09, 14:44
        Gun oil - Alcorn, 2018-02-09, 15:10
        Now that's running it wet! (nm) - WB, 2018-02-09, 15:04