Reeder Custom Guns - the internet wizards are actually internet idiots

Gary Reeder
the internet wizards are actually internet idiots
Friday, February 09, 2018, 12:24

keep a very light coating of oil on the bolt and a tiny bit of grease on the bolt (use a toothpick to apply it). All the oil does is attract dust and grit and causes your AR to jam up. Anderson Arms even says run the gun dry. I don't run mine dry but unless you look close you will think it is dry. I spray a piece of cloth with Rig 2 or Rem Oil and very lightly wipe the bolt down. On the locking lugs on the front of the bolt I use a tiny bit of Rig Universal grease put on with a toothpick.

? for all you AR DI shooters. Since I am a novice to this, - SPB, 2018-02-09, 11:59
- the internet wizards are actually internet idiots - Gary Reeder, 2018-02-09, 12:24
  - Ok, so a wipe down with CLP or similar, and a bit of grease - SPB, 2018-02-09, 12:51
    - I wouldn't use CLP unless you live in south Florida - Gary Reeder, 2018-02-09, 13:27
      - Good to know. Thank you Gary. (nm) - SPB, 2018-02-09, 13:33
- lots of oil/lube on bolt carrier drippin oil - carl hackney, 2018-02-09, 12:15
- I'M GUESSING KEEP IT OILED (nm) - JT, 2018-02-09, 12:06
  - Agree, just trying to understand how wet? (nm) - SPB, 2018-02-09, 12:18
    - Some guys put fluid in the supressors - WB, 2018-02-09, 14:07
      - Browning developed the 1917 A1 water cooled machine gun - Gary Reeder, 2018-02-09, 14:44
        Gun oil - Alcorn, 2018-02-09, 15:10
        Now that's running it wet! (nm) - WB, 2018-02-09, 15:04