|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- To JPL or whoever might be interested
- Sean Harper,
2020-01-11, 15:51
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- This is SOLD- Pending Funds (nm) - Sean Harper, 2020-01-12, 12:51
- Dan Wesson Barrel - Scott, 2020-01-11, 17:26
- Email me if interested ———- - Sean Harper, 2020-01-11, 15:53
- minor sight work
- james,
2020-01-11, 15:23
- That is a nice custom touch. - WB, 2020-01-11, 19:02
- Coloring engraving on you guns
- TX-T,
2020-01-11, 14:52
- Tony, take some good strong brake cleaner and
- Gary Reeder,
2020-01-11, 15:47
- Coloring engraving on you guns
- TX-T,
2020-01-12, 02:15
- Tony before we became a licensed manufacturer we were not - Gary Reeder, 2020-01-13, 10:30
- Coloring engraving on you guns
- TX-T,
2020-01-12, 02:15
- Tony, take some good strong brake cleaner and
- Gary Reeder,
2020-01-11, 15:47
- time for the Saturday sale. A lot of sale items today
- Gary Reeder,
2020-01-11, 11:02
- Gary, if the DW is still available I'll give it a good home. (nm) - JPL, 2020-01-11, 14:34
- the 50 Alaskan barrel, the Montana Hunter and the prototype
- Gary Reeder,
2020-01-11, 13:40
- That Dan Wesson is the best buy of the bunch (nm) - Claire Riggins, 2020-01-11, 13:43
- 357 Max
- Joe,
2020-01-11, 08:40
- 357 max
- Ron Orbeck,
2020-01-11, 19:01
- Gary may have a reamer - steve todd, 2020-01-11, 23:39
- 357 max
- Ron Orbeck,
2020-01-11, 19:03
- It's a rechambered factory barrel. - Joe, 2020-01-11, 19:43
- Thanks--I'll go with the less expensive Rem brass. (nm) - Joe, 2020-01-11, 11:44
- all brass manufacturers are supposed to go by SAAMI specs, - Gary Reeder, 2020-01-11, 09:50
- I've used them all - Sid R, 2020-01-11, 09:27
- Rem - Paul, 2020-01-11, 09:25
- 357 max
- Ron Orbeck,
2020-01-11, 19:01
- Gary, the CZ 452 arrived today
- Grover Sr,
2020-01-10, 21:38
- Contender not firing
- Josh,
2020-01-10, 20:38
- has the barrel been fit to your frame? If not it will have
- gary reeder,
2020-01-10, 22:26
- It really us a shame that the quality control
- Grover Sr,
2020-01-11, 10:08
- unfortunately the old days of buying a TC - Gary Reeder, 2020-01-11, 11:09
- Gary sending you an email. - Josh, 2020-01-11, 00:30
- It really us a shame that the quality control
- Grover Sr,
2020-01-11, 10:08
- has the barrel been fit to your frame? If not it will have
- gary reeder,
2020-01-10, 22:26
- Neil Peart, drummer for Rush, dead of cancer (nm)
- Gary Reeder,
2020-01-10, 16:25
- Like"The Trees", it's a make you think song. (nm) - Darryl T., 2020-01-10, 18:33
- I was fortunate to see them live.
- Randy Barnett,
2020-01-10, 16:57
- I played a lot of their stuff back in the mid to late 70s. - Gary Reeder, 2020-01-10, 17:32
- "A compromise is what I can never accept.”
- Greg M.,
2020-01-10, 16:33
- Shocked to hear it - Sam M, 2020-01-10, 17:46
- Fly by Night..by Rush (skip the ads) - Gary Reeder, 2020-01-10, 16:37
- a little sneak peek at some of our Saturday Sale
- Gary Reeder,
2020-01-10, 15:58
- DW fills me with serious lust (nm)
- JB,
2020-01-10, 20:47
- Ditto (nm) - Sid R, 2020-01-11, 09:29
- one more
- Gary Reeder,
2020-01-10, 17:13
- Nice! (nm) - Derek, 2020-01-11, 09:26
- DW fills me with serious lust (nm)
- JB,
2020-01-10, 20:47
- 10mm Bullets - The dies to swage down 41 Magnum bullets...
- Huey,
2020-01-10, 14:54
- WHAT DIES WILL YOU USE. I
- JT,
2020-01-10, 15:06
- I bought .404", .401" and .400"...
- Huey,
2020-01-10, 15:09
- I'm just playing around.... - WB, 2020-01-10, 15:26
- I bought .404", .401" and .400"...
- Huey,
2020-01-10, 15:09
- WHAT DIES WILL YOU USE. I
- JT,
2020-01-10, 15:06
- Virginia's new Gov says he will shut down all
- Gary Reeder,
2020-01-10, 11:39
- the same racist Gov. but now - Joe Pollock, 2020-01-10, 16:45
- Great, NY's Heir Cuomo will get more ideas from them. (nm) - Darryl T., 2020-01-10, 13:51
- Maybe consistent for the Old Dominion?
- Greg M.,
2020-01-10, 12:27
- Any disgruntled Virginians are welcome in AZ
- Greg M.,
2020-01-10, 12:54
- P.S. Gun ranges are everywhere
- Greg M.,
2020-01-10, 16:15
- I think this was aimed at the big NRA range. (nm) - Gary Reeder, 2020-01-10, 16:39
- P.S. Gun ranges are everywhere
- Greg M.,
2020-01-10, 16:15
- Any disgruntled Virginians are welcome in AZ
- Greg M.,
2020-01-10, 12:54
- what???? - james, 2020-01-10, 11:46
- Gov just trying to take the heat off himself. I would think
- Andy S,
2020-01-10, 11:44
- Do the normal people of Virginia not vote in elections?!! (nm)
- WB,
2020-01-10, 12:46
- Normals vote in VA
- Burban,
2020-01-10, 14:36
- It might be a stretch to call me normal. But
- Winn,
2020-01-10, 15:19
- Carpetbaggers (nm) - Sid R, 2020-01-10, 17:32
- It doesn't get much press but
- Burban,
2020-01-10, 14:41
- virginia - joepjs, 2020-01-11, 12:07
- It might be a stretch to call me normal. But
- Winn,
2020-01-10, 15:19
- Normals vote in VA
- Burban,
2020-01-10, 14:36
- Do the normal people of Virginia not vote in elections?!! (nm)
- WB,
2020-01-10, 12:46
- I had you make me a Hellcat about 3 years ago and now
- James Daughtry,
2020-01-10, 10:19
- James there is a copyright and trademark
- Gary Reeder,
2020-01-10, 10:59
- AND LAWYERS ALSO WIN WHETHER YOU WIN OR NOT (nm)
- JT,
2020-01-10, 11:32
- that is right. you might take the company to court
- Gary Reeder,
2020-01-10, 11:41
- Citizens are fooled into thinking laws are just, equal.
- WB,
2020-01-10, 13:08
- Sir Boggs is right on point - Bob Denning, 2020-01-10, 19:23
- Plus "Hellcat" has been used for decades to describe.
- Huey,
2020-01-10, 13:21
- That is not the point. The point is Reeder puts out
- James Daughtry,
2020-01-10, 14:05
- Actually, that is the point..
- Huey,
2020-01-10, 14:10
- James & Huey, it isn't worth arguing about. Thru the last 35 - Gary Reeder, 2020-01-10, 15:28
- Actually, that is the point..
- Huey,
2020-01-10, 14:10
- That is not the point. The point is Reeder puts out
- James Daughtry,
2020-01-10, 14:05
- Citizens are fooled into thinking laws are just, equal.
- WB,
2020-01-10, 13:08
- that is right. you might take the company to court
- Gary Reeder,
2020-01-10, 11:41
- AND LAWYERS ALSO WIN WHETHER YOU WIN OR NOT (nm)
- JT,
2020-01-10, 11:32
- James there is a copyright and trademark
- Gary Reeder,
2020-01-10, 10:59
- The greatest .357 Magnum handgun ever?
- WB,
2020-01-10, 10:11
- UNARGUABLY THE S&W .357 MAGNUM STARTING
- JT,
2020-01-10, 11:45
- I agree. (nm) - ChrisG, 2020-01-10, 15:10
- I have a 6-1/2” Registered Magnum and a 6” King Cobra (nm)
- Patrick McCann,
2020-01-10, 14:22
- What year did the “Registered” stop?
- WB,
2020-01-10, 14:31
- THE FIRST ONES WERE BASICALLY HANDFITTED
- JT,
2020-01-10, 14:53
- IN ADDITION TO SERIAL NUMBER
- JT,
2020-01-10, 14:56
- REG. MAG. PIX
- JT,
2020-01-10, 15:04
- NOTICE: NO TT NOR TH (nm)
- JT,
2020-01-10, 15:05
- I read somewhere that all the "registered" magnums were
- Gary Reeder,
2020-01-10, 15:37
- ALL PREs ARE 5 SCREW (nm) - JT, 2020-01-10, 16:22
- I had to ask, there are so many that don't know
- WB,
2020-01-10, 15:30
- REG MAG UNTIL 1939, PRE-27 UNTIL 1957; THEN M27 (nm) - JT, 2020-01-10, 16:24
- I read somewhere that all the "registered" magnums were
- Gary Reeder,
2020-01-10, 15:37
- NOTICE: NO TT NOR TH (nm)
- JT,
2020-01-10, 15:05
- REG. MAG. PIX
- JT,
2020-01-10, 15:04
- IN ADDITION TO SERIAL NUMBER
- JT,
2020-01-10, 14:56
- THE FIRST ONES WERE BASICALLY HANDFITTED
- JT,
2020-01-10, 14:53
- What year did the “Registered” stop?
- WB,
2020-01-10, 14:31
- I kinda like my Dan Wesson 15-2’s with 8” tubes (nm)
- Patrick McCann,
2020-01-10, 10:32
- Ditto (nm) - Sid R, 2020-01-11, 04:26
- DW are the secret stuff! Accuracy is back seat to none. - WB, 2020-01-10, 13:00
- yes
- james,
2020-01-10, 11:23
- Goodness James, you are the Handgunner's - WB, 2020-01-10, 12:43
- Python/M-27 - james, 2020-01-10, 11:35
- UNARGUABLY THE S&W .357 MAGNUM STARTING
- JT,
2020-01-10, 11:45
- Do you need a special die to do inside
- WB,
2020-01-10, 07:51
- Inside neck ream die - Frank B, 2020-01-10, 13:38
- the only one I have seen was for the original 44 Auto Mags. - Gary Reeder, 2020-01-10, 10:07
- Do it with your lathe
- stece todd,
2020-01-10, 10:07
- I'll tinker with it. My tail-stock is not in good shape
- WB,
2020-01-10, 10:14
- sounds like a personal problem (nm) - Gary Reeder, 2020-01-10, 10:26
- Hope that made sense - steve todd, 2020-01-10, 10:18
- I'll tinker with it. My tail-stock is not in good shape
- WB,
2020-01-10, 10:14
- For Bro. Jim, he didn't spear this one.
- WB,
2020-01-09, 20:50
- That's a sweet little 1892 Winny Trapper
- WB,
2020-01-10, 07:42
- I assume the revolver in the 2nd picture
- Patrick McCann,
2020-01-10, 08:13
- This is out there somewhere, sold - WB, 2020-01-10, 09:45
- I assume the revolver in the 2nd picture
- Patrick McCann,
2020-01-10, 08:13
- That's a sweet little 1892 Winny Trapper
- WB,
2020-01-10, 07:42
- another snow storm. Just in the 30 minutes it took me to get
- gary reeder,
2020-01-09, 19:01
- Hope Colleen made it out without issues (nm) - steve todd, 2020-01-10, 10:20
- Yup, we are in a winter storm watch starting - Tom, 2020-01-10, 07:32
- hopefully it won't pile up too deep. Colleen is flying out
- gary reeder,
2020-01-09, 19:04
- Good Luck (nm) - Grover Sr, 2020-01-09, 20:03
- another one for the in stock list
- Gary Reeder,
2020-01-09, 17:36
- If it is srlii available I would love to own it. (nm)
- Winn,
2020-01-09, 21:06
- Wow. Congrats Winn! (nm) - ChrisG, 2020-01-10, 15:11
- you got it Winn. Thanks (nm) - Gary Reeder, 2020-01-10, 10:12
- The ultimate "Un-M19". Lots stronger. (nm) - WB, 2020-01-09, 20:04
- carry - okie, 2020-01-09, 18:43
- If it is srlii available I would love to own it. (nm)
- Winn,
2020-01-09, 21:06
- a new El Diablo just finished for Paul Pressey
- Gary Reeder,
2020-01-09, 15:27
- Sweet! (nm) - GregG, 2020-01-09, 19:20
- Really nice package. (nm) - Andy S, 2020-01-09, 18:09
- Beautiful. (nm) - SPB, 2020-01-09, 17:04
- Wow (nm) - Brian T, 2020-01-09, 16:14
- Arkansas Gooses.
- WB,
2020-01-09, 08:22
- looks like NC - Dan Corbin, 2020-01-09, 19:32
- Love to hunt Snow geese. (nm) - Terry, 2020-01-09, 10:43
- Geese
- Geoffrey Lee,
2020-01-09, 08:58
- Call these guys...
- WB,
2020-01-09, 13:42
- AR goose hunting - Alcorn, 2020-01-09, 15:53
- Call these guys...
- WB,
2020-01-09, 13:42
- Have you ever thought about....
- Josh,
2020-01-09, 07:47
- Then why not offer formal instruction? (nm)
- PJ,
2020-01-09, 10:41
- Thought about that - Josh, 2020-01-09, 16:05
- Under the pew! (nm)
- Derek,
2020-01-09, 09:01
- After Katrina we went with chairs! - Josh, 2020-01-09, 16:18
- Then why not offer formal instruction? (nm)
- PJ,
2020-01-09, 10:41
- Case lube
- Josh,
2020-01-08, 22:17
- I use the Lee Resizing Lube - steve todd, 2020-01-09, 11:08
- Hornady is great and it can have other uses (nm) - Lynn, 2020-01-09, 08:37
- Imperial sizing die wax (nm) - Dave H., 2020-01-09, 05:29
- on straight cases I use Hornady One Shot. Put
- gary reeder,
2020-01-08, 22:27
- I will go with Gary on this, I find the One Shot - Amede, 2020-01-09, 07:12
- I USE ONE SHOT EVEN ON
- JT,
2020-01-09, 02:34
- John is right on that. Even with carbide dies
- Gary Reeder,
2020-01-09, 10:22
- I do that with the 357 max and 445 SM cases (nm) - Amede, 2020-01-09, 11:53
- John is right on that. Even with carbide dies
- Gary Reeder,
2020-01-09, 10:22
- What about resizing? I.E. .204 to .243? (nm)
- Josh,
2020-01-08, 22:33
- some folks don't but I recommend annealing
- Gary Reeder,
2020-01-09, 11:38
- That reminds me
- Josh,
2020-01-09, 16:11
- must have been no folks from San Francisco on that site (nm) - Gary Reeder, 2020-01-09, 16:15
- That reminds me
- Josh,
2020-01-09, 16:11
- Anything different in the neck? (nm) - Josh, 2020-01-09, 04:45
- Hornady Unique Lube, never lets me down (nm) - Sunny, 2020-01-08, 23:08
- some folks don't but I recommend annealing
- Gary Reeder,
2020-01-09, 11:38
- Meant “sizing wax” (nm) - Josh, 2020-01-08, 22:19
- 475 maximum for sale
- Kelly Brost,
2020-01-08, 16:52
- He's holding back... - Curt, 2020-01-09, 03:56
- you're welcome Kelly. For any of you that
- Gary Reeder,
2020-01-08, 17:50
- Dibs
- AlanT,
2020-01-09, 03:17
- Wow I feel the love or at least I think it's love (nm) - Kelly Brost, 2020-01-09, 08:38
- Hi Kelly! (nm)
- Kelye @ Belt Mtn,
2020-01-08, 21:01
- Hello Kelye !!! (nm) - Kelly Brost, 2020-01-09, 08:34
- Dibs
- AlanT,
2020-01-09, 03:17
- FIRST SHOTS THROUGH NEW PYTHON AND RUGER MK1V 10"
- JT,
2020-01-08, 16:51
- for all you guys asking about the Python,
- Gary Reeder,
2020-01-08, 17:42
- I do like that 10” Mark IV
- steve todd,
2020-01-08, 18:14
- Agree on both... (nm) - Huey, 2020-01-08, 18:17
- I do like that 10” Mark IV
- steve todd,
2020-01-08, 18:14
- COOL (nm)
- lYNN,
2020-01-08, 17:24
- Python
- okie,
2020-01-08, 20:42
- list price is $1500. For the first year or so
- gary reeder,
2020-01-08, 22:06
- They are selling on gunbroker for 3K+ with 20 bidders and
- Woody,
2020-01-08, 22:20
- when I talked to John Taffin this afternoon,
- gary reeder,
2020-01-08, 22:29
- Python
- okie,
2020-01-09, 18:37
- the only problem with that thinking is that
- Gary Reeder,
2020-01-10, 10:39
- Kinda silly isn’t it - Ronnie, 2020-01-11, 19:33
- the only problem with that thinking is that
- Gary Reeder,
2020-01-10, 10:39
- Python
- okie,
2020-01-09, 18:37
- when I talked to John Taffin this afternoon,
- gary reeder,
2020-01-08, 22:29
- They are selling on gunbroker for 3K+ with 20 bidders and
- Woody,
2020-01-08, 22:20
- list price is $1500. For the first year or so
- gary reeder,
2020-01-08, 22:06
- Python
- okie,
2020-01-08, 20:42
- for all you guys asking about the Python,
- Gary Reeder,
2020-01-08, 17:42
- a very special custom Encore barrel just finished
- Gary Reeder,
2020-01-08, 15:53
- 500 Nitro
- Kelly Brost,
2020-01-08, 16:43
- so says the man that shoots a 458 Lott in
- Gary Reeder,
2020-01-08, 17:43
- recoil
- AlanT,
2020-01-09, 03:18
- Recoil is mind over matter - T. Corder, 2020-01-09, 20:06
- recoil
- AlanT,
2020-01-09, 03:18
- so says the man that shoots a 458 Lott in
- Gary Reeder,
2020-01-08, 17:43
- 500 Nitro
- Kelly Brost,
2020-01-08, 16:43
- How my luck goes...
- WB,
2020-01-08, 11:54
- I feel your pain, Scotty
- GregG,
2020-01-08, 14:24
- me too but my dog thinks bigger - Gary Reeder, 2020-01-08, 16:25
- Another example of 'coon fingering' (nm) - JA, 2020-01-08, 13:13
- I love the pup's facial expression of total bliss - Greg M., 2020-01-08, 12:32
- Trash Panda! - Greg M., 2020-01-08, 12:28
- I feel your pain, Scotty
- GregG,
2020-01-08, 14:24