|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- 9mm trail gun for sale: second cylinder
- Keith,
2025-08-28, 13:00
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- length of cases
- Gary Reeder,
2025-08-28, 15:01
- Are you saying that 9x23 Win is too long? - Keith, 2025-08-30, 11:41
- length of cases
- Gary Reeder,
2025-08-28, 15:01
- .44 Magnum loads for a suppressor?
- John W,
2025-08-28, 08:27
- I shoot a 270 gr. in .44 Special.
- WB,
2025-08-28, 09:15
- I do appreciate any information.
- John W,
2025-08-28, 09:35
- I'd start about 8 gr. Unique, work up to maybe 10. (nm)
- WB,
2025-08-28, 10:04
- Thanks. I am looking forward to this. (nm) - John W, 2025-08-28, 18:17
- I'd start about 8 gr. Unique, work up to maybe 10. (nm)
- WB,
2025-08-28, 10:04
- I do appreciate any information.
- John W,
2025-08-28, 09:35
- I shoot a 270 gr. in .44 Special.
- WB,
2025-08-28, 09:15
- Being a “gun guy” folks ask you odd questions…
- WB,
2025-08-28, 07:05
- Yep, and you give some odd answers. (nm)
- IC,
2025-08-28, 07:11
- Luckily a picture… worth a thousand words. (nm) - WB, 2025-08-28, 09:16
- Yep, and you give some odd answers. (nm)
- IC,
2025-08-28, 07:11
- For Gary
- Paul,
2025-08-27, 10:47
- I'd loke to post one as well..emailed GR (nm)
- Dave H.,
2025-08-27, 11:03
- I would call the shop to ask. (nm) - steve todd, 2025-08-27, 19:22
- I'd loke to post one as well..emailed GR (nm)
- Dave H.,
2025-08-27, 11:03
- Fiber Optic Front Sight
- TM,
2025-08-26, 12:41
- I’d check Brownell’s. It’s a certain diameter pipe.
- WB,
2025-08-26, 13:27
- Do you have a remnant to mic? I have some pipe
- WB,
2025-08-26, 13:29
- Fiber Optic Size
- TM,
2025-08-27, 06:36
- Use the back end of a drill bit to check the diameter. (nm) - steve todd, 2025-08-27, 19:19
- LOL, you will make me do some math.
- WB,
2025-08-27, 10:05
- I appreciate that, tahnk you. (nm)
- TM,
2025-08-27, 12:35
- I'll be home tomorrow and see about hooking you up. (nm) - WB, 2025-08-27, 19:28
- I appreciate that, tahnk you. (nm)
- TM,
2025-08-27, 12:35
- Front Sight
- TM,
2025-08-26, 13:55
- Just Google....... - Kevin T, 2025-08-27, 07:43
- Fiber Optic Size
- TM,
2025-08-27, 06:36
- Do you have a remnant to mic? I have some pipe
- WB,
2025-08-26, 13:29
- I’d check Brownell’s. It’s a certain diameter pipe.
- WB,
2025-08-26, 13:27
- Small and medium autos...
- WB,
2025-08-26, 10:36
- J frame is my choice to solve most suburban problems
- Dave H.,
2025-08-26, 14:01
- Dave, I also have a similar gun to your
- james,
2025-08-27, 20:49
- How do you like that 230? I can’t seem to - WB, 2025-08-28, 07:00
- Really like your 439…I have a 459 (nm) - drdougrx, 2025-08-28, 05:00
- Dave, I also have a similar gun to your
- james,
2025-08-27, 20:49
- J frame is my choice to solve most suburban problems
- Dave H.,
2025-08-26, 14:01
- The ever elusive “HUMMINGBEAR” spotted…
- SPB,
2025-08-25, 08:15
- We had such a problem I removed
- Bob D,
2025-08-25, 17:06
- I was just thinking of you….
- WB,
2025-08-26, 19:15
- The chops look amazing. What time do we eat? (nm) - Bob D, 2025-08-27, 18:38
- I was just thinking of you….
- WB,
2025-08-26, 19:15
- That about happened to us - Howard, 2025-08-25, 12:08
- We had such a problem I removed
- Bob D,
2025-08-25, 17:06
- Everybody needs at least one…
- SPB,
2025-08-25, 07:36
- Encore Issue
- Brian T,
2025-08-23, 09:27
- Exactly, it's the bolt spring on the barrel. - WB, 2025-08-23, 10:44
- Full length guide rod on 1911? Thoughts? (nm)
- SPB,
2025-08-23, 09:03
- Maybe a solution in search of a problem? - Dave H., 2025-08-24, 06:53
- Some folks swear by them. I think the idea
- WB,
2025-08-23, 10:47
- I've always thought . . . - ORG, 2025-08-25, 07:04
- I finally got in some more reloading dies...
- WB,
2025-08-22, 10:05
- I load the heaviest bullet that loads easily ..
- Jim Taylor,
2025-08-23, 08:22
- It would be a pain to inside ream cases
- WB,
2025-08-23, 10:48
- That didn't go quite as planned...
- WB,
2025-08-23, 14:57
- Bear Creek Supply 380 98 grain
- Jim Taylor,
2025-08-23, 17:37
- Jim ~ do you like Bear Creek Supply?
- Dave H.,
2025-08-24, 12:41
- I have used them for 9 years ..
- Jim Taylor,
2025-08-24, 13:49
- Thanks - Dave H., 2025-08-24, 15:39
- I have used them for 9 years ..
- Jim Taylor,
2025-08-24, 13:49
- My velocities were abysmal, 600 fps - WB, 2025-08-23, 18:07
- Jim ~ do you like Bear Creek Supply?
- Dave H.,
2025-08-24, 12:41
- Bear Creek Supply 380 98 grain
- Jim Taylor,
2025-08-23, 17:37
- That didn't go quite as planned...
- WB,
2025-08-23, 14:57
- It would be a pain to inside ream cases
- WB,
2025-08-23, 10:48
- I load the heaviest bullet that loads easily ..
- Jim Taylor,
2025-08-23, 08:22
- Dragon Slayer- 10mm
- Gary Reeder,
2025-08-21, 16:00
- Very distinctive and artsy! Gorgeous! (nm) - drdougrx, 2025-08-23, 03:53
- A striking feature is the apparent bushingless
- WB,
2025-08-22, 06:21
- one piece guide rod (nm) - Gary Reeder, 2025-08-22, 10:25
- Just for more discussion, 200 or 230gr FP and
- drdougrx,
2025-08-20, 11:37
- Thinking of using them in my Shield 3.3” (nm)
- drdougrx,
2025-08-21, 05:26
- My PM45 is smaller still and handles 230 ball fine
- WB,
2025-08-22, 06:26
- I run factory 230 hardball in my Firestar - Dave H., 2025-08-22, 08:26
- My PM45 is smaller still and handles 230 ball fine
- WB,
2025-08-22, 06:26
- 250+P at ~950fps, please…
- Dave H.,
2025-08-20, 19:06
- lol, I loaded up some custom 300 gr. For my - WB, 2025-08-21, 09:10
- I’ve seen commercial loads with both at 1000 FPS! - WB, 2025-08-20, 18:34
- The 230 at 850 fps will shoot through a LOT!
- Jim Taylor,
2025-08-20, 11:44
- You darn right it will!! (nm) - Dave H., 2025-08-20, 19:06
- Thinking of using them in my Shield 3.3” (nm)
- drdougrx,
2025-08-21, 05:26
- Are there any NEW T/C frames out there??
- Dave H.,
2025-08-19, 20:25
- TC Frames
- Brian T,
2025-08-21, 09:39
- Out of Stock, and I'm in need of a G2 as well (nm) - Dave H., 2025-08-21, 14:49
- I'd like to find a frame also! (nm) - Derek, 2025-08-20, 19:05
- TC Frames
- Brian T,
2025-08-21, 09:39
- .338 GNR LOADING
- WB,
2025-08-19, 15:09
- Gonna try this
- Dave338,
2025-08-19, 17:32
- You need to measure the bullet seating with the barrel off
- WB,
2025-08-20, 10:46
- Hornaday makes an inexpensive bullet comparsion - jthomson, 2025-08-20, 19:08
- You need to measure the bullet seating with the barrel off
- WB,
2025-08-20, 10:46
- Gonna try this
- Dave338,
2025-08-19, 17:32
- Meanwhile, in the United Kingdom
- Jim Taylor,
2025-08-19, 08:22
- For you .380 addicts…
- SPB,
2025-08-19, 06:36
- They just brought a whole batch of police - WB, 2025-08-19, 12:19
- Cabela's has one for 1K - Jim Taylor, 2025-08-19, 06:46
- 45acp flat points for SD? Thoughts?
- drdougrx,
2025-08-19, 04:11
- I used to cast my .45 Colt 255 gr. FN - WB, 2025-08-20, 10:49
- Been carrying them since the BLM riots - Dave H., 2025-08-19, 15:43
- I was watching the Sean Ryan show online
- WB,
2025-08-19, 12:14
- I remenber a 215 gr load
- Dave H.,
2025-08-19, 15:48
- My 230 gr. 45 ACP flat nose load - Jim Taylor, 2025-08-19, 15:55
- that was Col. Dick Thompson .. - Jim Taylor, 2025-08-19, 12:24
- MASS ....
- Jim Taylor,
2025-08-19, 12:19
- Considering that… any recollections on the 200 gr. 38 slug?
- WB,
2025-08-19, 12:39
- I shot some but was not interested ..
- Jim Taylor,
2025-08-19, 13:44
- I had good luck with the 180 gr. in .357 - WB, 2025-08-19, 15:13
- There's always the Law of Diminishing Returns (nm) - Jim Taylor, 2025-08-19, 15:09
- I shot some but was not interested ..
- Jim Taylor,
2025-08-19, 13:44
- Considering that… any recollections on the 200 gr. 38 slug?
- WB,
2025-08-19, 12:39
- I remenber a 215 gr load
- Dave H.,
2025-08-19, 15:48
- I have always made it a point to carry
- jthomson,
2025-08-19, 09:48
- I've yet to ever find a case where ammo
- Dave H.,
2025-08-19, 15:51
- I am with you. (nm) - Jim Taylor, 2025-08-19, 15:53
- From a Texas Attorney - Jim Taylor, 2025-08-19, 11:13
- I've yet to ever find a case where ammo
- Dave H.,
2025-08-19, 15:51
- I shoot quite a few of them .. - Jim Taylor, 2025-08-19, 06:53
- Mark 4 Ruger
- Paul,
2025-08-18, 08:24
- Ruger Mark 4 Grip - TM, 2025-08-18, 08:36
- Deer Hunting With Cowboy Action Ammo
- TM,
2025-08-18, 07:12
- Should shoot completely through, any angle - WB, 2025-08-18, 15:43
- Star Model BM 9MM
- Jim Taylor,
2025-08-17, 15:14
- I like Star Pistols. - ~JM~, 2025-08-17, 19:13
- Great guns. I have several over the years
- Blake,
2025-08-17, 18:13
- Why no love for the Star Firestar?
- Dave H.,
2025-08-17, 19:10
- In a 45 I want a 1911! (nm) - Blake, 2025-08-18, 11:49
- Star - Rbeck, 2025-08-18, 04:04
- I prefer the factory magazines. Haven't tried others. (nm) - Jim Taylor, 2025-08-17, 18:33
- Why no love for the Star Firestar?
- Dave H.,
2025-08-17, 19:10
- Super Blackhawk stainless…
- SPB,
2025-08-17, 08:31
- And, it has a stainless slide! (nm)
- IC,
2025-08-17, 10:30
- Stainless slide? On a revolver?
- ORG,
2025-08-18, 07:48
- I have seen a lot of things on single actions - Jim Taylor, 2025-08-18, 08:38
- Stainless slide? On a revolver?
- ORG,
2025-08-18, 07:48
- And, it has a stainless slide! (nm)
- IC,
2025-08-17, 10:30
- Anyone had a chance to inspect the new Colt revolvers?
- Dave H.,
2025-08-17, 07:38
- No experience here, but , MR. JT spoke well of them. (nm)
- SPB,
2025-08-17, 08:32
- Internet reviews vary widely. I too am interested in knowin. (nm)
- SPB,
2025-08-17, 08:51
- And are they all drilled and tapped? - Dave H., 2025-08-17, 09:02
- Internet reviews vary widely. I too am interested in knowin. (nm)
- SPB,
2025-08-17, 08:51
- No experience here, but , MR. JT spoke well of them. (nm)
- SPB,
2025-08-17, 08:32
- Taurus 1911 - series 70? 80? Triggers?
- Dave H.,
2025-08-16, 11:45
- We are up and running again
- colleen reeder,
2025-08-16, 08:45