mess it up, you can always use a helicoil.
-
Recommendations on pulling out a
- O’ Gary, 2018-01-31, 19:30
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- not to argue with the guys below, but take it to your local - Gary Reeder, 2018-02-01, 12:12
-
Usually
- Shawn Davis, 2018-01-31, 22:48
- +1 on the left handed drill bit (nm) - Blake, 2018-02-01, 05:17
- If you do not have access to a machine shop - Larry Fry, 2018-01-31, 21:26
-
Drill hole in the screw, follow up with easy out. If you....
- Jeff Spencer, 2018-01-31, 20:05
- Yes a sharp bit and drill press. Whack a divot - WB, 2018-01-31, 21:02