Reeder Custom Guns - Yes a sharp bit and drill press. Whack a divot

WB
Yes a sharp bit and drill press. Whack a divot
Wednesday, January 31, 2018, 21:02

on the top with a punch if you can to keep the bit straight and centered from the start. If you walk it and totally blow it, go from a #6-48 to a #8-48 tapped hole. Also you can ignore it and just use 3 holes.

Recommendations on pulling out a - O’ Gary, 2018-01-31, 19:30
- not to argue with the guys below, but take it to your local - Gary Reeder, 2018-02-01, 12:12
- Usually - Shawn Davis, 2018-01-31, 22:48
  - +1 on the left handed drill bit (nm) - Blake, 2018-02-01, 05:17
- If you do not have access to a machine shop - Larry Fry, 2018-01-31, 21:26
- Drill hole in the screw, follow up with easy out. If you.... - Jeff Spencer, 2018-01-31, 20:05
  - Yes a sharp bit and drill press. Whack a divot - WB, 2018-01-31, 21:02