Reeder Custom Guns - not to argue with the guys below, but take it to your local

Gary Reeder
not to argue with the guys below, but take it to your local
Thursday, February 01, 2018, 12:12

gun shop and let them do it right. One slip and you have ruined the threads plus probably put a gouge in the barrel and have to spend 3 times as much to fix your fuggup.

Recommendations on pulling out a - O’ Gary, 2018-01-31, 19:30
- not to argue with the guys below, but take it to your local - Gary Reeder, 2018-02-01, 12:12
- Usually - Shawn Davis, 2018-01-31, 22:48
  - +1 on the left handed drill bit (nm) - Blake, 2018-02-01, 05:17
- If you do not have access to a machine shop - Larry Fry, 2018-01-31, 21:26
- Drill hole in the screw, follow up with easy out. If you.... - Jeff Spencer, 2018-01-31, 20:05
  - Yes a sharp bit and drill press. Whack a divot - WB, 2018-01-31, 21:02