|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- When and why did Ruger cease production
- ChrisG,
2018-01-07, 08:53
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I've been reading that and its a wise move...
- Huey,
2018-01-07, 08:59
- I wondered about that. Makes sense to me.
- ChrisG,
2018-01-07, 10:42
- My new GP100 in 327 Federal is one if the....
- Huey,
2018-01-07, 10:44
- Have not seen one but I want one! Just loaded 100
- ChrisG,
2018-01-07, 11:04
- I like them, but put my own grips on mine...
- Huey,
2018-01-07, 11:17
- A bit sideways on the topic of GP100
- WB,
2018-01-07, 15:51
- Dang that sounds like a lot of work. (nm) - ChrisG, 2018-01-08, 04:58
- Bought one in 44Special...lots less trouble :) (nm)
- Woody,
2018-01-07, 19:36
- I was just playing around, learned a bunch
- WB,
2018-01-08, 07:28
- I am glad you don't work for a living and have so much - Gary Reeder, 2018-01-08, 13:16
- Learning is always a good thing! (nm) - ChrisG, 2018-01-08, 11:30
- I was just playing around, learned a bunch
- WB,
2018-01-08, 07:28
- A bit sideways on the topic of GP100
- WB,
2018-01-07, 15:51
- I like them, but put my own grips on mine...
- Huey,
2018-01-07, 11:17
- Have not seen one but I want one! Just loaded 100
- ChrisG,
2018-01-07, 11:04
- My new GP100 in 327 Federal is one if the....
- Huey,
2018-01-07, 10:44
- I wondered about that. Makes sense to me.
- ChrisG,
2018-01-07, 10:42
- I've been reading that and its a wise move...
- Huey,
2018-01-07, 08:59
- 10'' model 29
- Winn,
2018-01-06, 14:43
- thanks Winn. Enjoy it! (nm) - Gary Reeder, 2018-01-06, 15:15
- New Strike Back coming Feb 2nd
- Kase Reeder,
2018-01-06, 14:15
- in my humble opinion, the absolute best action series ever
- Gary Reeder,
2018-01-06, 14:41
- Watched it all,thanks for the heads up. (nm) - Andy S, 2018-01-08, 07:05
- in my humble opinion, the absolute best action series ever
- Gary Reeder,
2018-01-06, 14:41
- question for the know-it alls???
- MWC,
2018-01-06, 13:47
- Stealth gear USA.
- Gus S.,
2018-01-06, 21:59
- +1 on the ventcore - Josh, 2018-01-07, 15:26
- Just switched to kydex by WE THE PEOPLE. I like it. (nm) - SPB, 2018-01-06, 14:35
- Shield Holster - Rgates, 2018-01-06, 13:58
- I'm a skinny know-nothin', can't help Mark. - WB, 2018-01-06, 13:57
- Stealth gear USA.
- Gus S.,
2018-01-06, 21:59
- Huey, you need to call me
- Amede,
2018-01-06, 12:21
- I can call, but $$$ is tight...Got three Reeders going...
- Huey,
2018-01-06, 12:50
- You need to call me. It might be that good
- Amede,
2018-01-06, 15:53
- Amede , What ya' got going? (nm)
- Winn,
2018-01-06, 20:55
- sent you an email last night (nm) - Amede, 2018-01-07, 07:15
- Amede, Email Sent... (nm) - Huey, 2018-01-06, 17:49
- Amede , What ya' got going? (nm)
- Winn,
2018-01-06, 20:55
- You need to call me. It might be that good
- Amede,
2018-01-06, 15:53
- I can call, but $$$ is tight...Got three Reeders going...
- Huey,
2018-01-06, 12:50
- Gary Rebarrel?
- Clint H,
2018-01-06, 12:11
- sure we have done a bunch of the 256 Falcons (nm) - Gary Reeder, 2018-01-06, 12:14
- Thoughts on Armalite Def 10 AR, any experience? (nm)
- SPB,
2018-01-05, 21:57
- I have a Armalite 10 in 260 rem. Unbeleivably accurate and - Kevin E, 2018-01-06, 17:59
- Thank you. (nm) - SPB, 2018-01-06, 12:35
- Ar 10 - Clint, 2018-01-06, 12:00
- we have 2 Armalites, the AR-15 and the AR-10
- Gary Reeder,
2018-01-06, 11:36
- one has to remember too that all AR-15s are - Gary Reeder, 2018-01-06, 11:41
- 321 GNR - A good friend of mine bought the Varmint Hammer...
- Huey,
2018-01-05, 18:28
- 321
- Frank B,
2018-01-05, 18:48
- Fantastic! I haven't shot outside in Illinois - ChrisG, 2018-01-06, 07:20
- when I develope a new cartridge I have a goal in mind - Gary Reeder, 2018-01-05, 20:26
- 321GNR - Kevin L. Pflaum, 2018-01-05, 19:37
- 321
- Frank B,
2018-01-05, 18:48
- 41 mag refinishing
- Mike Casselton,
2018-01-05, 16:36
- Mike, I will add it to your order. (nm)
- Gary Reeder,
2018-01-05, 17:35
- Mike I lied. I need to know what the order was, and when
- Gary Reeder,
2018-01-05, 17:44
- details
- Mike Casselton,
2018-01-05, 18:15
- Looks like this
- Mike Casselton,
2018-01-05, 18:18
- Mike, when did you send the gun? I looked in all of
- Gary Reeder,
2018-01-06, 22:06
- I'll check with the guy that shipped it for me
- Mike Casselton,
2018-01-07, 13:37
- He's not in today so I'll try again tomorrow (nm)
- Mike Casselton,
2018-01-07, 13:44
- yeah, get him to check tracking. It was so busy during the - Gary Reeder, 2018-01-07, 14:05
- He's not in today so I'll try again tomorrow (nm)
- Mike Casselton,
2018-01-07, 13:44
- I'll check with the guy that shipped it for me
- Mike Casselton,
2018-01-07, 13:37
- thanks Mike (nm) - Gary Reeder, 2018-01-05, 19:57
- Mike, when did you send the gun? I looked in all of
- Gary Reeder,
2018-01-06, 22:06
- Looks like this
- Mike Casselton,
2018-01-05, 18:18
- details
- Mike Casselton,
2018-01-05, 18:15
- Mike I lied. I need to know what the order was, and when
- Gary Reeder,
2018-01-05, 17:44
- Mike, I will add it to your order. (nm)
- Gary Reeder,
2018-01-05, 17:35
- I talked with Paco Kelly today
- Jim Taylor,
2018-01-05, 14:52
- Glad to hear! (nm) - Drdoigrx, 2018-01-05, 16:32
- Good to here
- Grover Sr,
2018-01-05, 16:16
- Thats Hear, dadgum auto correct! (nm) - Grover Sr, 2018-01-05, 16:18
- Good news, still praying. (nm) - SPB, 2018-01-05, 15:21
- Appreciate the update! (nm) - Russell Cottle, 2018-01-05, 15:10
- primers
- jack s,
2018-01-05, 14:26
- according to the gun and the powder. If you are using - Gary Reeder, 2018-01-05, 14:36
- I found this interesting mechanically.
- WB,
2018-01-05, 14:07
- Forwarning; some of those tolerances
- WB,
2018-01-05, 14:23
- Those bullets are generally used for short range Benchrest
- Mike Casselton,
2018-01-05, 15:04
- Yes - Dave H., 2018-01-06, 06:06
- Those bullets are generally used for short range Benchrest
- Mike Casselton,
2018-01-05, 15:04
- Scotty, if you ever want to learn more
- Mike Casselton,
2018-01-05, 14:21
- And like most guys who are serious about - Dave H., 2018-01-06, 06:07
- Forwarning; some of those tolerances
- WB,
2018-01-05, 14:23
- Gary do you build muzzle breaks on SS rifles
- Brent Foy,
2018-01-05, 12:52
- sure, do it all the time. It is $200 plus 3 rounds of ammo - Gary Reeder, 2018-01-05, 12:55
- Went to Customs today...
- Huey,
2018-01-05, 11:27
- He did mention putting the scopes on the form ONLY...
- Huey,
2018-01-05, 11:31
- Amede is in oregon which is real close to California
- Gary Reeder,
2018-01-05, 11:32
- These folks went above and beyond...
- Huey,
2018-01-05, 11:35
- I have gone to customs offices quite a few times
- Gary Reeder,
2018-01-05, 11:38
- just talked to Dean. They were super nice to him
- Gary Reeder,
2018-01-05, 12:09
- They were really nice, just needed to see the ammo (nm)
- Amede,
2018-01-05, 16:10
- which was total BS. We checked up on the rules and there - Gary Reeder, 2018-01-05, 17:46
- Simple as Red and Blue... (nm) - Huey, 2018-01-05, 12:36
- They were really nice, just needed to see the ammo (nm)
- Amede,
2018-01-05, 16:10
- just talked to Dean. They were super nice to him
- Gary Reeder,
2018-01-05, 12:09
- I have gone to customs offices quite a few times
- Gary Reeder,
2018-01-05, 11:38
- These folks went above and beyond...
- Huey,
2018-01-05, 11:35
- Amede is in oregon which is real close to California
- Gary Reeder,
2018-01-05, 11:32
- He did mention putting the scopes on the form ONLY...
- Huey,
2018-01-05, 11:31
- Sorry, Gary couldn't help myself. Never again. (nm)
- Winn,
2018-01-05, 11:08
- you are fine Winn. When I deleted that post I figured it - Gary Reeder, 2018-01-05, 11:31
- Might be a good donor Marlin. Not mine.
- SPB,
2018-01-05, 08:48
- that is a good price if any of you need a custom
- Gary Reeder,
2018-01-05, 09:58
- Wht about 30 YNR conversion? (nm)
- Grover Sr,
2018-01-05, 12:11
- GNR not YNR (nm)
- Grover Sr,
2018-01-05, 12:55
- that would be perfect for the 30 GNR (nm) - Gary Reeder, 2018-01-05, 13:09
- GNR not YNR (nm)
- Grover Sr,
2018-01-05, 12:55
- Wht about 30 YNR conversion? (nm)
- Grover Sr,
2018-01-05, 12:11
- that is a good price if any of you need a custom
- Gary Reeder,
2018-01-05, 09:58
- Gary, how much for a front sight like on Lee’s 475 Howdah?
- Kyle,
2018-01-04, 22:21
- John Linebaugh has those made. Lee wanted a modified
- Gary Reeder,
2018-01-04, 23:11
- Thanks Gary (nm) - Kyle, 2018-01-04, 23:33
- John Linebaugh has those made. Lee wanted a modified
- Gary Reeder,
2018-01-04, 23:11
- I pulled the thread about the 6.5. Quite often if I feel
- Gary Reeder,
2018-01-04, 20:05
- Truth only offends those who dont want to hear it (nm)
- Kevin E,
2018-01-04, 21:35
- I saw nothing wrong with it (nm) - charlie A, 2018-01-05, 00:21
- Didn't bother me. (nm)
- IC,
2018-01-04, 21:32
- Me either... (nm)
- Huey,
2018-01-05, 04:09
- I now it's scary but I deal with science every day.
- WB,
2018-01-05, 11:04
- does anyone have any idea what in hell he just said?? (nm)
- Gary Reeder,
2018-01-05, 11:05
- My Interpretation
- Shaun,
2018-01-05, 12:19
- LOL , close enough. Perhaps of a parable type. - WB, 2018-01-05, 13:43
- he would make a good politician. Lots of words but said - Jerome, 2018-01-05, 11:07
- My Interpretation
- Shaun,
2018-01-05, 12:19
- does anyone have any idea what in hell he just said?? (nm)
- Gary Reeder,
2018-01-05, 11:05
- I now it's scary but I deal with science every day.
- WB,
2018-01-05, 11:04
- Me either... (nm)
- Huey,
2018-01-05, 04:09
- Truth only offends those who dont want to hear it (nm)
- Kevin E,
2018-01-04, 21:35
- Health
- Jim Taylor,
2018-01-04, 19:35
- i AM HEALTHY (nm) - LYNN, 2018-01-04, 22:04
- Excellent. I do all of that. (nm)
- SPB,
2018-01-04, 20:41
- I will - james, 2018-01-05, 00:21
- probably not true but funny
- jthomson,
2018-01-04, 18:21
- But, that is the lefts style. (nm) - SPB, 2018-01-04, 19:03
- It's been a while since I've proposed a bit wild idea
- WB,
2018-01-04, 14:25
- Blanking dies
- Bob Denning,
2018-01-04, 19:22
- shopping?? have you gone gay on us? (nm) - Gary Reeder, 2018-01-05, 11:34
- 586 GNR
- Bob Denning,
2018-01-04, 19:36
- Just use copper rubbing (nm)
- Blake,
2018-01-05, 11:24
- Tubing! stupid phone (nm)
- Blake,
2018-01-05, 11:25
- I’ve heard that’s how mr. Barns originally - Brent Foy, 2018-01-05, 12:37
- Shoot the little end caps may even be the ticket (nm)
- Blake,
2018-01-05, 11:27
- I found those pure copper HAWKs to be a little gummy
- WB,
2018-01-05, 13:46
- Yea but the 586 is under 2000fps so it would find I bet (nm) - Blake, 2018-01-05, 16:53
- I found those pure copper HAWKs to be a little gummy
- WB,
2018-01-05, 13:46
- Tubing! stupid phone (nm)
- Blake,
2018-01-05, 11:25
- Sounds like a heap of fun! Enjoy your trip! - WB, 2018-01-05, 11:07
- Just use copper rubbing (nm)
- Blake,
2018-01-05, 11:24
- the only problem I see is the gouging of the front of
- Gary Reeder,
2018-01-04, 17:09
- Yeah making blanks or shotshells you'd - WB, 2018-01-04, 18:47
- Blanking dies
- Bob Denning,
2018-01-04, 19:22
- Guns for Africa... One slight change...
- Huey,
2018-01-04, 12:33
- Well, Gary probably won't love this post about the 44 Spec..
- Huey,
2018-01-04, 11:26
- nah, the 44 Special and 45 Long Colt are our two best
- Gary Reeder,
2018-01-04, 11:35
- I've really grown fond of Longshot powder...
- Huey,
2018-01-04, 11:59
- 44 special equivalent loads in the 44mag - Mike Casselton, 2018-01-04, 12:27
- I've really grown fond of Longshot powder...
- Huey,
2018-01-04, 11:59
- nah, the 44 Special and 45 Long Colt are our two best
- Gary Reeder,
2018-01-04, 11:35
- AMT 30 for sale, no mine just noticed the offer
- SPB,
2018-01-04, 11:21
- Wow...
- David Brown,
2018-01-04, 11:54
- the average I have seen them sell for is around $1000 (nm) - Gary Reeder, 2018-01-04, 13:56
- Wow...
- David Brown,
2018-01-04, 11:54
- Another look at the .475/480 vs .500s
- Dave H.,
2018-01-04, 06:49
- Dead is dead
- Zach,
2018-01-04, 09:42
- 500vs ??? - Frank Simon, 2018-01-04, 16:58
- Dave, I have 510GNR, 475LB, 410 GNR, - Larry Fry, 2018-01-04, 08:53
- Dave, I'm really careful about using the term "Better"...
- Huey,
2018-01-04, 07:01
- "Better" is a relative term, yes, I was thinking in the
- Dave H.,
2018-01-04, 13:02
- Understand and have pondered the same things...
- Huey,
2018-01-04, 13:15
- Oh I think we do have plenty of room... - Dave H., 2018-01-04, 13:26
- Understand and have pondered the same things...
- Huey,
2018-01-04, 13:15
- THE BEST CARTRIDGE IS EASY TO NAME. THE ONE WHICH STANDS
- JT,
2018-01-04, 07:57
- Plus they don't count in your collection total - WB, 2018-01-04, 08:39
- "Better" is a relative term, yes, I was thinking in the
- Dave H.,
2018-01-04, 13:02
- From what I understand, Linebaugh developed...
- Stuart in GA,
2018-01-04, 06:58
- I remember reading the development progress in G&A
- WB,
2018-01-04, 08:36
- .475 American Hunter - Stonecold, 2018-01-04, 11:40
- In the early days I made all my own brass
- Jim Taylor,
2018-01-04, 10:11
- I remember you telling me that tale...
- WB,
2018-01-04, 11:24
- when I sent the Jurras Memorial to Lee Jurras to get
- Gary Reeder,
2018-01-04, 13:55
- Oops! Sounds like Lee was a real character til
- ChrisG,
2018-01-04, 14:53
- yep, losing 3 good friends in a short period of time - Gary Reeder, 2018-01-04, 17:12
- Oops! Sounds like Lee was a real character til
- ChrisG,
2018-01-04, 14:53
- when I sent the Jurras Memorial to Lee Jurras to get
- Gary Reeder,
2018-01-04, 13:55
- I remember you telling me that tale...
- WB,
2018-01-04, 11:24
- I remember reading the development progress in G&A
- WB,
2018-01-04, 08:36
- Dead is dead
- Zach,
2018-01-04, 09:42