Reeder Custom Guns

This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner.

Return to Gary Reeder Custom Guns

We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay.

BOARD POLICY

We got a large load of once fired brass yesterday from one - Gary Reeder, 2024-02-13, 12:20

Another one I need to get out and unlimber this Spring - WB, 2024-02-13, 09:00

A less discussed Reeder super round... - WB, 2024-02-12, 19:49

Northern AZ before the "big snow". This was the day after - Gary Reeder, 2024-02-12, 16:15
- It was in the 60s Saturday and today we got 10” of snow (nm) - Howard, 2024-02-13, 11:57
  - Minus 8 yesterday and minus 7 today. Colder than - Gary Reeder, 2024-02-13, 12:10

Suddenly the perspiration of reality sets in - WB, 2024-02-12, 14:56
- Before you get into it big time, you better get - Gary Reeder, 2024-02-12, 16:20
  - You are correct. Years ago I held the licenses - WB, 2024-02-12, 17:25

Super Bowl - Jim Taylor, 2024-02-12, 07:38
- Super Ag! - David R, 2024-02-12, 12:45
- Super Bowl - Mark Wilson, 2024-02-12, 08:34

Something interesting, a Platypus 1911 9mm? - WB, 2024-02-11, 19:21

Found some old pics of another project. - WB, 2024-02-11, 14:38
- WB, I will send you a sample of shot, - jthomson, 2024-02-12, 18:25
  - I bet you are a terror on the range with the .410! (nm) - WB, 2024-02-13, 09:05
- That's cool WB. Funny story about shot shells - Brad Barnett, 2024-02-11, 15:46
  - Good old American ingenuity.... My hat is - JFS, 2024-02-11, 18:55
    - I have used larger shot, #5 actually as thats - WB, 2024-02-11, 19:07

Couple interesting inertia bullet pulling tricks - WB, 2024-02-11, 14:25
- pulling bullets - tedt, 2024-02-11, 23:13
  - The only cases I found that I can't pull is the 586 GNR and - Gary Reeder, 2024-02-12, 12:30
    - Yes that is good thinking, considering. - WB, 2024-02-13, 09:03
  - I had read that and forgotten, never tried it! (nm) - WB, 2024-02-12, 08:04

The sun was out for a few minutes this morning, long - Gary Reeder, 2024-02-10, 11:12

Snowing like mad in southern Az (nm) - Paul, 2024-02-10, 08:45
- Raining here ... temps in the 50's and 60's .. - Jim Taylor, 2024-02-10, 10:52
  - Over 5 feet of snow in Northern Arizona - Gary Reeder, 2024-02-10, 11:05
    - We are looking at 13” Monday into Tuesday. (nm) - Andy S, 2024-02-10, 18:21
      - That's a lot of rain. - Brad Barnett, 2024-02-10, 21:44
      - North East Pa. (nm) - Andy S, 2024-02-10, 18:22

The Python is back in blue. I like the blue revolvers over - Gary Reeder, 2024-02-08, 18:47
- drab stainless cure - tedt, 2024-02-10, 19:47
  - Super nice pair.Tedt (nm) - Brad Barnett, 2024-02-10, 21:45
    - I told a girl that once and got slapped! (nm) - Jim Taylor, 2024-02-11, 08:31
  - Yep, That fixes that! (nm) - steve todd, 2024-02-10, 19:53
- “Blue Steel and gun leather “ John Bianchi. (nm) - SPB, 2024-02-09, 20:47
- I agree with you about blue finish.... - JFS, 2024-02-09, 17:35
  - Great looking set JFS (nm) - Brad Barnett, 2024-02-10, 06:54
- Not handled one yet, how does the action feel... - WB, 2024-02-09, 11:13
  - In my experience the blued guns have always been smoother - Gary Reeder, 2024-02-12, 13:02

Flagstaff made national news tonight. They had - Gary Reeder, 2024-02-08, 18:40
- fox weather had a good story about Flagstaff - TK, 2024-02-09, 19:39
- That was a very kind and uncommon jesture. - WB, 2024-02-09, 08:56
- Well done Gary. Thank you. (nm) - SPB, 2024-02-08, 19:14
- Stay warm boss - Brad Barnett, 2024-02-08, 19:10

S&W 422 - Paul, 2024-02-08, 13:23
- S&W 422 - JT, 2024-02-08, 16:47
  - Yep like JT's last pic. with the black grip panels (nm) - Paul, 2024-02-09, 07:15
  - I gave my daughter one for Christmas several years ago - Gary Reeder, 2024-02-08, 18:26
  - I have a stainless one like JTs 1st pic - Brad Barnett, 2024-02-08, 17:04
- That’s the one with an upside down slide? Lol - WB, 2024-02-08, 13:45

Our Super Storm hit us the night before last - Gary Reeder, 2024-02-08, 11:28
- Looks like a lot of weight on the roof. (nm) - Paul, 2024-02-08, 13:21
  - Yes it is but our roof is canted enough to keep it from - Gary Reeder, 2024-02-08, 18:27
- These pics were another storm about 2 weeks ago. This - Gary Reeder, 2024-02-08, 12:31

New 44 mag - Brian T, 2024-02-07, 13:04
- I supress inital aesthetics & applaud any efforts of a SA - WB, 2024-02-07, 13:47
  - Any one have any idea what WB just said? (nm) - Gary Reeder, 2024-02-08, 10:53
    - I’ll not poor-mouth it, it’s a new SA! I’ll be happy. - WB, 2024-02-08, 13:33
  - Why buy this instead of a Ruger or Smith - Brad Barnett, 2024-02-07, 19:51
    - My thoughts exactly. For that price you could get a Super - Gary Reeder, 2024-02-08, 10:52

Hmmmmm…… - SPB, 2024-02-07, 12:51
- AMEN (nm) - Gary Reeder, 2024-02-08, 10:53

Anybody ever try a Colt New Frontier .22 SA? - WB, 2024-02-07, 12:25
- I have one... - ~JM~, 2024-02-08, 15:04
  - That’s classic, except for grips before 1873 - WB, 2024-02-08, 19:30
- My impression - ORG, 2024-02-08, 12:36
  - There’s just something robust about Rugers - WB, 2024-02-08, 13:37
- Got one of these, but never fired it - jthomson, 2024-02-07, 16:11
- Never had one, but understand the childhood dream problem. (nm) - SPB, 2024-02-07, 12:51
  - My childhood dream was a hot teacher i had! (nm) - Jeff Spencer, 2024-02-07, 15:09
    - My chemistry teacher was a little brunette who was - Gary Reeder, 2024-02-08, 11:15

Little-Known Reloading Phenomena - Jim Taylor, 2024-02-07, 07:52
- Smallest ctg. I’ve loaded was .32 ACP - WB, 2024-02-07, 11:05
  - Years ago we came up with a 17 Rat's Ass cartridge - Gary Reeder, 2024-02-08, 11:07
    - I have loaded a few dozen 22LR with different molds and now - Sean Harper, 2024-02-08, 12:17
      - Is there any light .224” with a check shank - WB, 2024-02-08, 13:40
        
        Yes , I have 2 molds I do that with. - Sean Harper, 2024-02-09, 07:59
        
        I made a swage pin to use with the LEE sizer - WB, 2024-02-09, 08:52
  - Just got some cast 78gr .313 bullets for .32acp - Jeff Spencer, 2024-02-07, 18:12

For you military buffs we still have that 03-A3 - Gary Reeder, 2024-02-06, 17:11
- If it's still available, I would take it (nm) - Erik Stenberg, 2024-02-06, 17:23
  - Sorry Erik, it sold about 10 minutes after - Gary Reeder, 2024-02-06, 21:11

Our 12th and final Western Classic should be - Gary Reeder, 2024-02-06, 17:03

Our weather people said the big super storm would start - Gary Reeder, 2024-02-06, 15:48

Remember this one. A Colt SAA? - Gary Reeder, 2024-02-05, 18:12
- Well done so far Boss! (nm) - drdougrx, 2024-02-06, 05:18
- Looks like you found good polishing compound! (nm) - WB, 2024-02-05, 18:24
  - It takes a lot more than polishing compound to bring a gun - Gary Reeder, 2024-02-05, 22:39
    - A poor polisher can ruin a job, that shows skill! (nm) - WB, 2024-02-06, 10:30
      - I've seen many nice guns ruined by a really - Gary Reeder, 2024-02-06, 15:41
- Coming along nicely, Gary. (nm) - Jim Taylor, 2024-02-05, 18:15
  - thanks Jim (nm) - Gary Reeder, 2024-02-05, 18:21
    - "Steady as she goes"............. (nm) - JFS, 2024-02-06, 13:54
      - AMEN on that (nm) - Gary Reeder, 2024-02-06, 15:41

Another project gun from the estate... Colt DA38 - Gary Reeder, 2024-02-05, 17:56
- That’s a 1892 Army model from Philippine–American War - WB, 2024-02-05, 18:32

From an estate sale, the best 6.5 - Gary Reeder, 2024-02-05, 17:04
- Gary I'll take the Remington and the Sterling if still - Brad Barnett, 2024-02-05, 17:35
  - great buy, that 264 should be a beast with - jthomson, 2024-02-05, 21:18
  - Brad, the Sterling sold about 5 minutes ago. I will hold the - Gary Reeder, 2024-02-05, 17:52
    - I assume you mean the Remington 700 and not the Remington 03 (nm) - Gary Reeder, 2024-02-05, 17:53
      - Yes sir. Remington 700 (nm) - Brad Barnett, 2024-02-05, 18:04
        
        You got it Brad...thanks (nm) - Gary Reeder, 2024-02-05, 18:07
        
        No sir thank you for the great deals you put on here! (nm) - Brad Barnett, 2024-02-05, 19:00
        
        That's what I'm here for (nm) - Gary Reeder, 2024-02-05, 22:41
        
        I got here late and wound up saving alot of money. Damn it. (nm) - Winnturner48, 2024-02-06, 11:17
        
        I actually showed up in time. First for me. (nm) - Brad Barnett, 2024-02-06, 14:37