can see from the replies there are many opinions and LOTS of experience from a variety of handgun hunters. I have shot all of the cartridges mentioned and at the age of 75 am finding that the recoil is becoming an issue with me because of arthritis in my hands and fingers. I do have a Reeder 510 Hunter that I have carried for many years in the field in Alaska. I shoot both the short and long GNR 510 rounds and have killed hogs with both. The short round doesn't kick quite as much and the long has a little more with a little more punch. A day at the range and about 25 rounds or so is all I can handle. I don't know if that is an issue with you but it should be considered. I shoot the 350 grain loads S & L from Gary's reloading manual. The bullets can be found at Montana Bullet Works. They are really great people there and can get you the bullets you want or you can do like several on here do and cast your own. The people on here that cast can give you a lot of information even if you are experienced in casting. I have 475 LB in an Encore and brother that sucker kicks! Not many of those and I call it quits. BUT, for a hunter it will knock down anything you are liable to encounter. For paper cutting not so much. Good luck in whatever your decision is and once again welcome.
-
Big bore cartridge recommendations
- Kiel, 2020-04-30, 23:51
-
I have that same gun in 500 LB I'll make you a
- jthomson, 2020-05-01, 21:20
- I sent you a note - Kiel, 2020-05-02, 21:41
-
Pics of Kiel's gun
- Howard, 2020-05-01, 17:12
-
There she is!
- Kiel, 2020-05-02, 21:44
-
I thought that was a fair and reasonable price
- Howard, 2020-05-03, 12:06
- Thanks Howard - Kiel, 2020-05-04, 12:50
-
I thought that was a fair and reasonable price
- Howard, 2020-05-03, 12:06
- I thought about it too...but I already have 50 revolvers... (nm) - Woody, 2020-05-01, 18:46
-
There she is!
- Kiel, 2020-05-02, 21:44
- Lots of opinions here. I have several had more. - WB, 2020-05-01, 15:07
-
For punching paper, a light load in a 510gnr would be good. (nm)
- Lymey, 2020-05-01, 14:47
- I understand the allure of punching - Tom, 2020-05-01, 15:07
-
Surprised I have not seen the 460 Sw mentioned
- Leon, 2020-05-01, 14:45
-
surprisingly enough the 460 hasn't done anywhere near as
- Gary Reeder, 2020-05-01, 16:20
- Would be neat to see a 450 Bushmaster revolver! (nm) - Jb, 2020-05-01, 19:13
-
surprisingly enough the 460 hasn't done anywhere near as
- Gary Reeder, 2020-05-01, 16:20
- American Hunter in 510 GNR - steve todd, 2020-05-01, 14:31
- Kiel, welcome to the forum. As you - Larry Fry, 2020-05-01, 10:16
-
.500 Linebaugh
- Brent Clark, 2020-05-01, 09:54
- Beautiful Revolver! - Kiel, 2020-05-03, 23:53
- Agreed .500 Linebaugh is the one - Curt, 2020-05-01, 11:59
-
King of Big Bores
- Sam, 2020-05-01, 05:07
-
you guys (especially you Sam) forget
- charlie A., 2020-05-01, 11:14
- - (nm) - Wow good for you, 2020-05-01, 13:05
-
King of Big Bores
- Kiel, 2020-05-01, 09:43
-
you really can't add the other 2 calibers down the road
- Gary Reeder, 2020-05-01, 11:32
- Thanks for your recommendation GNR! - Kiel, 2020-05-03, 23:47
-
500SW
- Sam, 2020-05-01, 13:08
-
Sam, if you plan on staying on this forum, get off your
- Gary Reeder, 2020-05-01, 13:12
-
Gary,
- Lewis, 2020-05-01, 13:28
- crazier every day (nm) - charlie A., 2020-05-02, 04:56
- Lewis, I don't know if you are trying to start something or - Gary Reeder, 2020-05-01, 14:09
-
Gary,
- Lewis, 2020-05-01, 13:28
-
boy I wish I was as smart as you think you are. (nm)
- charlie A., 2020-05-01, 13:10
- that post was to Sam, not GNR (nm) - charlie A., 2020-05-01, 17:17
-
Sam, if you plan on staying on this forum, get off your
- Gary Reeder, 2020-05-01, 13:12
-
A STRETCH FRAME CANNOT BE A PPP (nm)
- JT, 2020-05-01, 13:07
-
not even with a 3.5" bbl and birdshead gripframe? (nm)
- Woody, 2020-05-01, 20:17
- BY DEFINITION: BBL LENGTH 4" TO 5-1/2" AND - JT, 2020-05-01, 22:04
-
not even with a 3.5" bbl and birdshead gripframe? (nm)
- Woody, 2020-05-01, 20:17
-
you really can't add the other 2 calibers down the road
- Gary Reeder, 2020-05-01, 11:32
-
"KING OF THE BIG BORES"????
- JT, 2020-05-01, 07:51
- No matter how many different calibers I - Grover Sr, 2020-05-01, 13:56
- I have to agree with you sir. - Sid R, 2020-05-01, 08:56
-
“King”
- Sam, 2020-05-01, 08:10
-
LIGHTEN UP SAM! (nm)
- JT, 2020-05-01, 08:45
-
boy this quarantine thing must have everybody wanting
- charlie A., 2020-05-01, 12:57
- I will have to agree with that (nm) - James, 2020-05-01, 13:35
-
THICK SKIN IS TURNING TO TISSUE PAPER (nm)
- JT, 2020-05-01, 13:04
- more like toilet paper (nm) - Jeremy, 2020-05-01, 13:13
-
boy this quarantine thing must have everybody wanting
- charlie A., 2020-05-01, 12:57
-
LIGHTEN UP SAM! (nm)
- JT, 2020-05-01, 08:45
-
Was just going to post the same about the old 45 Colt...
- Huey, 2020-05-01, 07:57
- .45 Colt's actually the biggest I've got right now. - ChrisG, 2020-05-01, 10:28
-
I would like to suggest the .41 Magnum
- Jim Taylor, 2020-05-01, 07:58
-
Achilles !! (nm)
- azj, 2020-05-01, 11:04
-
YES (nm)
- ChrisG, 2020-05-01, 11:49
- Yes, Yes to the Achilles (nm) - steve todd, 2020-05-01, 13:26
-
YES (nm)
- ChrisG, 2020-05-01, 11:49
-
King of....
- Shaun, 2020-05-01, 08:19
-
I CAN MAKE A GOOD CASE FOR THE ORIGINAL MAGNUM (nm)
- JT, 2020-05-01, 08:46
- 357 Jt? (nm) - Bucky, 2020-05-01, 11:30
-
And I like that one too!! (nm)
- Jim Taylor, 2020-05-01, 10:12
- 357 is awesome (nm) - Bucky, 2020-05-01, 11:33
-
I CAN MAKE A GOOD CASE FOR THE ORIGINAL MAGNUM (nm)
- JT, 2020-05-01, 08:46
-
Achilles !! (nm)
- azj, 2020-05-01, 11:04
-
you guys (especially you Sam) forget
- charlie A., 2020-05-01, 11:14
- I would like a .510 GNR. I think the best budget - ChrisG, 2020-05-01, 04:05
-
Hello Kiel, welcome
- Howard, 2020-05-01, 01:10
- First Reeder for me - Kiel, 2020-05-01, 09:40
-
Gary just finished this UBW too.
- Howard, 2020-05-01, 01:23
- I did see that UBW - Kiel, 2020-05-02, 21:48
-
.510 and .480 calibers
- jfo4, 2020-05-01, 06:03
- Lower pressure rounds - Kiel, 2020-05-02, 21:52
-
To contribute to an answer for a 50 calber option,
- O’ Gary, 2020-05-01, 09:07
-
For paper punching, anything more than a 44mag is a waste...
- Woody, 2020-05-01, 11:32
- Visceral Euphoria? - Kiel, 2020-05-02, 21:59
-
You guys are all over the place
- Alcorn, 2020-05-01, 15:16
-
I’m a fan of Gary’s .455GNR! (nm)
- Larryh, 2020-05-01, 16:20
-
That is a great cartridge (nm)
- Alcorn, 2020-05-01, 16:58
-
thanks Alcorn. That is awful white of you (nm)
- Gary Reeder, 2020-05-01, 17:15
-
just got on here. I see several folks saying the
- J. Chancery, 2020-05-01, 17:21
- that is a tuff one. I was just talking to Andy - Gary Reeder, 2020-05-01, 17:56
-
just got on here. I see several folks saying the
- J. Chancery, 2020-05-01, 17:21
-
thanks Alcorn. That is awful white of you (nm)
- Gary Reeder, 2020-05-01, 17:15
-
That is a great cartridge (nm)
- Alcorn, 2020-05-01, 16:58
-
I’m a fan of Gary’s .455GNR! (nm)
- Larryh, 2020-05-01, 16:20
-
For paper punching, anything more than a 44mag is a waste...
- Woody, 2020-05-01, 11:32
-
I have that same gun in 500 LB I'll make you a
- jthomson, 2020-05-01, 21:20