|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- I have had one of my guys building TC barrels in the last 3
- Gary Reeder,
2022-04-23, 13:09
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I would like the 455 GNR barrel if available, thanks. (nm) - Andy S, 2022-04-23, 15:58
- 310 GNR barrel
- Bryan Pettet,
2022-04-23, 15:58
- for those interested, 928-527-4100 but we are closing in a
- Gary Reeder,
2022-04-23, 16:03
- Thanks Gary... - Bryan Pettet, 2022-04-24, 19:15
- for those interested, 928-527-4100 but we are closing in a
- Gary Reeder,
2022-04-23, 16:03
- Finally a Saturday Sale. (nm) - Bobby Childs, 2022-04-23, 15:09
- Looking at the 'weird' revolver below
- JS,
2022-04-23, 08:26
- MANY YEARS AGO A TOP-BREAK
- JT,
2022-04-23, 08:40
- in the late 80s, Detonics was very popular with - Gary Reeder, 2022-04-23, 12:29
- Most likely is shoulda been called a "Break The Top" ... (nm)
- Jim Taylor,
2022-04-23, 09:58
- top break 44 Mag
- stonecold,
2022-04-23, 13:40
- It COULD be done, but it seems a daring effort - WB, 2022-04-24, 10:48
- top break 44 Mag
- stonecold,
2022-04-23, 13:40
- MANY YEARS AGO A TOP-BREAK
- JT,
2022-04-23, 08:40
- Turkey loads? !!!
- John W,
2022-04-23, 02:40
- NO PROBLEM HERE. I'VE TAKEN ALL MY TURKETS
- JT,
2022-04-23, 06:56
- I wish we could do that here. (nm)
- John W,
2022-04-23, 07:21
- HAD TO GO TO TEXAS (nm)
- JT,
2022-04-23, 08:41
- When I lived in Arizona handguns were legal for turkeys ..
- Jim Taylor,
2022-04-23, 09:36
- hunting deer in Tennessee back in the late 80s I heard - Gary Reeder, 2022-04-23, 12:59
- When I lived in Arizona handguns were legal for turkeys ..
- Jim Taylor,
2022-04-23, 09:36
- HAD TO GO TO TEXAS (nm)
- JT,
2022-04-23, 08:41
- I wish we could do that here. (nm)
- John W,
2022-04-23, 07:21
- Turkey load prices have went crazy! (nm)
- Derek,
2022-04-23, 04:29
- everything else has gone crazy too, why not shotshells. (nm) - Gary Reeder, 2022-04-23, 13:00
- NO PROBLEM HERE. I'VE TAKEN ALL MY TURKETS
- JT,
2022-04-23, 06:56
- crazy weather. Yesterday strong winds and warm dry weather
- gary reeder,
2022-04-22, 20:51
- Was Nate's house spared? (nm)
- Winn,
2022-04-23, 07:21
- Reply
- Nate H,
2022-04-23, 11:01
- Praying for y,all, Nate. (nm) - Winn, 2022-04-24, 10:08
- Hang in there (nm) - ChrisG, 2022-04-23, 14:19
- I am happy to hear that! (nm) - Jim Taylor, 2022-04-23, 11:04
- Reply
- Nate H,
2022-04-23, 11:01
- Was Nate's house spared? (nm)
- Winn,
2022-04-23, 07:21
- 327 Federal brass available at Freedom Arms
- MTM,
2022-04-22, 16:05
- Look at the site again. (nm)
- IC,
2022-04-22, 20:15
- Issues with their sight, but I got my brass delivered (nm) - MTM, 2022-04-23, 04:15
- Look at the site again. (nm)
- IC,
2022-04-22, 20:15
- Uniqe Revolver made me think of WB
- Derek,
2022-04-22, 14:52
- does kinda look like him :) (nm) - Lynn, 2022-04-22, 19:37
- Certainly a homely little thing. Think I’ll watch YOU shoot (nm) - MTM, 2022-04-22, 16:02
- Purposeful, unique, more bark than bite
- WB,
2022-04-22, 15:53
- Yeah, is a neat piece, but idk about that thing Lol (nm) - Derek, 2022-04-22, 17:01
- Thinking About Bullets And Bores And Stuff
- Jim Taylor,
2022-04-22, 07:06
- Forget the cylinder, go for the THROAT
- Dave H.,
2022-04-22, 10:15
- the Maxi Throat is simply a longer version of the Taylor - Gary Reeder, 2022-04-22, 11:53
- Throat - Jim Taylor, 2022-04-22, 10:31
- GOOD STUFF! AS RUSH SAID: "THE - JT, 2022-04-22, 07:46
- Very good Jim.
- Mark Conner,
2022-04-22, 07:43
- Never forget when JD`s 320- 44 bullet came - james, 2022-04-22, 11:42
- Forget the cylinder, go for the THROAT
- Dave H.,
2022-04-22, 10:15
- Winchester 1895 .35 WCF
- Ronnie P,
2022-04-22, 05:17
- What a sad tale and beautiful rifle. - WB, 2022-04-22, 12:40
- Console Vault?
- John W,
2022-04-22, 02:35
- Why buy a pussy box - JT, 2022-06-12, 16:57
- Handgun Safe
- Brian T,
2022-04-22, 05:08
- That would suit my needs very well. - John W, 2022-04-23, 02:23
- I presented my youngest with his first handgun
- WB,
2022-04-21, 18:41
- Baby’s first murder weapon - Hank, 2022-06-12, 16:52
- What a great way - AmBraCol, 2022-04-23, 08:30
- Fantastic! (nm) - ChrisG, 2022-04-22, 02:23
- Great first gun Scotty (nm)
- Sean Harper,
2022-04-21, 18:43
- They will enjoy the Reeder's later - WB, 2022-04-21, 19:17
- here is the #2 custom gun
- Gary Reeder,
2022-04-21, 17:02
- What’s the #3 - Bob, 2022-06-12, 16:55
- If I could I would own that beautiful pistol. (nm) - Sid R, 2022-04-22, 01:13
- WHAT A GRAND .44-40!! (nm) - JT, 2022-04-21, 18:12
- 44-40
- Dave,
2022-04-21, 16:47
- ALMOST IMPOSSIBLE TO FIND. STARLINE
- JT,
2022-04-21, 18:13
- Can you run 38-40 thru a die to make 44-40
- Sean Harper,
2022-04-21, 20:19
- Thank You! (nm) - Dave, 2022-04-22, 17:44
- You can blow them out just by firing them in 44-40 - Jim Taylor, 2022-04-21, 20:30
- Can you run 38-40 thru a die to make 44-40
- Sean Harper,
2022-04-21, 20:19
- ALMOST IMPOSSIBLE TO FIND. STARLINE
- JT,
2022-04-21, 18:13
- Probably a dumb question about the 500 Nitro
- Bucky,
2022-04-21, 16:12
- Yep, very dumb - Gary Reeder, 2022-06-12, 16:53
- No (nm)
- Blake,
2022-04-21, 16:18
- .500 Nitro - Okie, 2022-04-22, 16:54
- notice that Gary's 500 worked just fine
- grady Lynn,
2022-04-21, 15:54
- Mercifully that .500 is blowing about
- WB,
2022-04-21, 19:22
- never thought about that (nm)
- Lynn,
2022-04-22, 09:55
- we built a series of 5 of the 500 Nitro TCs back in 1990
- Gary Reeder,
2022-04-22, 14:35
- Like pulling chicken teeth finding a G2 frame (nm) - Derek, 2022-04-22, 16:58
- we built a series of 5 of the 500 Nitro TCs back in 1990
- Gary Reeder,
2022-04-22, 14:35
- never thought about that (nm)
- Lynn,
2022-04-22, 09:55
- Mercifully that .500 is blowing about
- WB,
2022-04-21, 19:22
- two new customs for you. One at a time. Here is #1.
- Gary Reeder,
2022-04-21, 15:01
- gorgeous (nm) - Lynn, 2022-04-22, 09:57
- Dang that’s perfect! (nm)
- Blake,
2022-04-21, 17:29
- Yes it is!!! (nm)
- ChrisG,
2022-04-21, 18:22
- That's really nice! (nm) - Derek, 2022-04-21, 18:34
- Yes it is!!! (nm)
- ChrisG,
2022-04-21, 18:22
- Who's gunna figure this one out?
- Mark Conner,
2022-04-21, 14:39
- MOLD NUMBER "429" SHOULD BE A .44!?!?!? (nm)
- JT,
2022-04-21, 15:33
- Yep, should be 429. - Mark Conner, 2022-04-21, 15:41
- You know the narrow part of the bore
- WB,
2022-04-21, 15:30
- The throats on my 455 - Mark Conner, 2022-04-21, 15:50
- MOLD NUMBER "429" SHOULD BE A .44!?!?!? (nm)
- JT,
2022-04-21, 15:33
- For those who hunted the Y-O, know bear whisperer George
- WB,
2022-04-21, 13:04
- Why was he mad at bears? - Yogi, 2022-06-12, 16:56
- Sad news. Time is marching too fast! (nm) - GregG, 2022-04-21, 14:29
- for those that are Sig fans...2 new guns and a new round
- Gary Reeder,
2022-04-21, 12:23
- A fat .270, huh? (nm) - Dave H., 2022-04-21, 16:44
- youtube video of a Gary Reeder 500 Nitro Express
- Ray,
2022-04-21, 11:41
- good ad for Bwana--also the fire at Flag was on the news (nm) - Lynn, 2022-04-21, 15:47
- Serial number 001! I would load that puppy down lol
- Derek,
2022-04-21, 13:31
- Did he come ot HHC once? Looks familiar. (nm) - WB, 2022-04-21, 15:26
- The best way to watch that boy is remotely, on video.
- WB,
2022-04-21, 12:54
- amen (nm) - Lynn, 2022-04-21, 15:55
- Is that the "Stick Your Thumb In It" guy? (nm)
- ~JM~,
2022-04-21, 15:47
- Yes, that's him, the one who's 50 cal blew up (nm)
- Derek,
2022-04-21, 15:58
- Lucky he is a large strong guy & wasn't alone. (nm) - ~JM~, 2022-04-21, 21:05
- Yes, that's him, the one who's 50 cal blew up (nm)
- Derek,
2022-04-21, 15:58
- BBBB Biden's Build Back Better" is working!
- JT,
2022-04-21, 10:10
- No one got this - Jesse, 2022-06-12, 16:59
- east coast handgunners
- james,
2022-04-21, 09:45
- James,what scope n power is it. Great Pick (nm)
- Sal,
2022-04-22, 16:06
- Sal, Sorry for late reply.. Burris 2-7X (nm) - james, 2022-04-23, 13:53
- Nice shooting James. Congratulations (nm) - Blake, 2022-04-21, 16:16
- Very nice! Neat gun too. (nm) - WB, 2022-04-21, 10:44
- Nice trophy James, by the way so can the owner of that gun.
- Andy S,
2022-04-21, 10:08
- Salt creek is a nice place. - Tim Pence, 2022-04-21, 11:49
- good on you (nm)
- Lynn,
2022-04-21, 10:36
- Excellent (nm)
- Brian T,
2022-04-21, 10:51
- Nice! (nm)
- Derek,
2022-04-21, 12:16
- Nicely Done Sir! (nm)
- Marco,
2022-04-21, 12:38
- thank you guys for the nice words...... (nm)
- james,
2022-04-21, 14:53
- PS- the guys from the group came from Michigan- - james, 2022-04-21, 14:59
- thank you guys for the nice words...... (nm)
- james,
2022-04-21, 14:53
- Nicely Done Sir! (nm)
- Marco,
2022-04-21, 12:38
- Nice! (nm)
- Derek,
2022-04-21, 12:16
- Excellent (nm)
- Brian T,
2022-04-21, 10:51
- James,what scope n power is it. Great Pick (nm)
- Sal,
2022-04-22, 16:06
- John Taffin had his yearly check up today. Here
- gary reeder,
2022-04-20, 21:49
- Good goingJT. Good for another 10yrs (nm) - Sal, 2022-04-22, 16:12
- Good for him!! (nm)
- Jim Taylor,
2022-04-21, 05:01
- I heard tell that - Marco, 2022-04-21, 11:56
- wish my numbers came close to JT`s (nm)
- james,
2022-04-21, 09:48
- I WISH I COULD STILL SHOOT THE LOADS YOU DO! - JT, 2022-04-21, 10:06
- tomorrow may be a bad day for Northern Arizona as we
- gary reeder,
2022-04-20, 21:37
- current fire info - David R, 2022-04-21, 09:11
- Gary, you do a bit of retail,
- TM,
2022-04-20, 13:51
- I have been in retail since my first shop in 1977
- Gary Reeder,
2022-04-20, 14:48
- 1977 Montgomery Wards’s
- Grover Sr,
2022-04-20, 17:13
- in 1977 I was still in radio and a partner in a shop
- Gary Reeder,
2022-04-20, 18:25
- Pics. Wish I had stumbled on you and the misfits 20 years - Lymey, 2022-04-21, 16:00
- After looking at these timeless photos, - Andy S, 2022-04-21, 06:12
- in 1977 I was still in radio and a partner in a shop
- Gary Reeder,
2022-04-20, 18:25
- 1977 Montgomery Wards’s
- Grover Sr,
2022-04-20, 17:13
- I have been in retail since my first shop in 1977
- Gary Reeder,
2022-04-20, 14:48
- AmBraCol
- IC,
2022-04-20, 10:09
- No sir, I haven't. (nt)
- AmBraCol,
2022-04-20, 12:46
- I'll send you 100 new Starline if you want them. (nm)
- IC,
2022-04-20, 16:10
- I'm interested. - AmBraCol, 2022-04-21, 06:40
- I'll send you 100 new Starline if you want them. (nm)
- IC,
2022-04-20, 16:10
- No sir, I haven't. (nt)
- AmBraCol,
2022-04-20, 12:46