|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- Unusual weather for October. At 6AM this
- Gary Reeder,
2023-10-30, 15:44
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- COLD HERE ALSO. 28 THIS AM (nm)
- JT,
2023-10-30, 16:22
- 39 this morning on the San Gabriel River. (nm)
- Jim Taylor,
2023-10-30, 17:47
- warmed up a bit. 9 degrees this morning - Gary Reeder, 2023-10-31, 12:14
- 39 this morning on the San Gabriel River. (nm)
- Jim Taylor,
2023-10-30, 17:47
- COLD HERE ALSO. 28 THIS AM (nm)
- JT,
2023-10-30, 16:22
- 70-150 Wcf
- Derek,
2023-10-29, 18:57
- Very respectable penetration! Those old
- WB,
2023-10-30, 09:50
- I'd like to try that out on a hog!! (nm) - Derek, 2023-10-31, 03:37
- was surprised at the lack of energy. I know energy
- Gary Reeder,
2023-10-30, 17:44
- That's where that TKO kicks in.
- WB,
2023-10-30, 20:49
- The TKO, developed by John Pondoro Taylor - Gary Reeder, 2023-10-31, 12:29
- Tko= 117 and 123 if I did my math right Lol (nm)
- Derek,
2023-10-31, 04:12
- The TKO formula is bullet weight X speed X caliber divided - Gary Reeder, 2023-10-31, 12:32
- That's where that TKO kicks in.
- WB,
2023-10-30, 20:49
- Great video; reminds me of Bob Dennings 586 we shot at the - Andy S, 2023-10-30, 04:02
- Very respectable penetration! Those old
- WB,
2023-10-30, 09:50
- The Code
- Jim Taylor,
2023-10-28, 08:51
- Amen ; words to live and die by. (nm) - Andy S, 2023-10-28, 11:33
- Marlin 336
- Lymey,
2023-10-27, 19:03
- They made some stainless laminate
- WB,
2023-10-28, 12:28
- I believe the guide gun model was 336D, - IC, 2023-10-29, 08:03
- They made some stainless laminate
- WB,
2023-10-28, 12:28
- Prayer request
- AmBraCol,
2023-10-27, 15:21
- Will do so. (nm) - John W, 2023-10-30, 17:15
- Prayers sent.. (nm) - Sean Harper, 2023-10-30, 12:46
- Done. (nm) - Mark Wilson, 2023-10-30, 08:55
- Done. I'm in your shoes with my boy. (nm) - Greg, 2023-10-30, 08:04
- Done (nm) - Jeff Spencer, 2023-10-28, 20:29
- LORD protect those who go in harms way on our behalf. (nm) - Marco, 2023-10-28, 18:32
- Done! - Blackpete, 2023-10-28, 14:47
- Absolutely. Done (nm) - Blake, 2023-10-28, 14:22
- Prayers are done (nm) - Ron Orbeck, 2023-10-28, 08:53
- Done! (nm) - DinCA, 2023-10-28, 07:03
- Prayers sent (nm) - Charliebadger, 2023-10-28, 06:42
- Will do, and do so daily. May Jesus Christ bless & protect (nm) - SPB, 2023-10-28, 06:14
- Done - drdougrx, 2023-10-28, 04:57
- Done (nm) - Erik Stenberg, 2023-10-27, 20:03
- Done. (nm) - JPL, 2023-10-27, 19:09
- Done (nm) - Lymey, 2023-10-27, 18:52
- Done! (nm) - Derek, 2023-10-27, 18:50
- Done (nm) - Andy S, 2023-10-27, 18:42
- Done (nm) - ChrisG, 2023-10-27, 18:07
- May God protect him. (nm) - WB, 2023-10-27, 17:26
- Done (nm) - DennisD, 2023-10-27, 16:46
- DONE TODAY AND EVERY DAY (nm) - JT, 2023-10-27, 16:25
- Yessir. Will do. (nm) - Jim Taylor, 2023-10-27, 15:56
- Done (nm)
- Gary Reeder,
2023-10-27, 15:28
- Done (nm) - steve todd, 2023-10-28, 12:08
- I spent the morning sighting in a bunch of guns
- Gary Reeder,
2023-10-27, 14:47
- Ruger 22 mag
- Lymey,
2023-10-27, 18:51
- Last summer I used my six inch Smith to
- JFS,
2023-10-28, 12:41
- I have that same gun except mine got scratches all over it.
- Gary Reeder,
2023-10-28, 13:21
- scratches........ - JFS, 2023-10-28, 15:50
- I have that same gun except mine got scratches all over it.
- Gary Reeder,
2023-10-28, 13:21
- Last summer I used my six inch Smith to
- JFS,
2023-10-28, 12:41
- Ruger 22 mag
- Lymey,
2023-10-27, 18:51
- Some years ago Mark Conner took some photos for me ..
- Jim Taylor,
2023-10-27, 07:31
- So cool! (nm) - ChrisG, 2023-10-27, 18:04
- Jim,
- Mark Conner,
2023-10-27, 16:59
- Thanks Mark. I shot many a hole in the tail of that windmill
- Jim Taylor,
2023-10-27, 17:44
- I don't remember either Jim.
- Mark Conner,
2023-10-27, 18:43
- Uhm ... yeah .. that's probably it. (nm) - Jim Taylor, 2023-10-27, 20:03
- I don't remember either Jim.
- Mark Conner,
2023-10-27, 18:43
- Thanks Mark. I shot many a hole in the tail of that windmill
- Jim Taylor,
2023-10-27, 17:44
- Very cool, put a hickory handle in that thing!
- WB,
2023-10-27, 10:20
- Or they might want me to use it! (nm) - Jim Taylor, 2023-10-27, 10:36
- I’ve got a work event coming up, a Trap shoot!
- WB,
2023-10-26, 20:18
- Remember the size of your pattern at the distance
- Blake,
2023-10-28, 14:34
- Got to drag out the old 1100 after church. (nm) - WB, 2023-10-29, 15:00
- I have been shooting trap for over 60 yrs
- jthomson,
2023-10-27, 05:27
- One fellow suggested to not look at the trap
- WB,
2023-10-27, 10:17
- They let you mount the gun shooting Trap
- steve todd,
2023-10-28, 10:06
- I can see where "fit" is critical. - WB, 2023-10-28, 12:31
- I shot skeet for a good while until I got bored
- Gary Reeder,
2023-10-27, 12:17
- I had a couple SKB 600's, liked them.
- WB,
2023-10-27, 17:25
- The SKBs are great guns.They have built ultra fine shotguns - Gary Reeder, 2023-10-27, 17:33
- I had a couple SKB 600's, liked them.
- WB,
2023-10-27, 17:25
- yes what you say has meaning to me but I would - jthomson, 2023-10-27, 11:00
- They let you mount the gun shooting Trap
- steve todd,
2023-10-28, 10:06
- One fellow suggested to not look at the trap
- WB,
2023-10-27, 10:17
- Remember the size of your pattern at the distance
- Blake,
2023-10-28, 14:34
- Information
- klpflaum,
2023-10-26, 16:32
- Kevin here is a pic of the BMF. It is an old pic. - Gary Reeder, 2023-10-26, 17:51
- Have not seen a BMF (nm)
- Derek,
2023-10-26, 17:20
- A better pic of the BMF
- Gary Reeder,
2023-10-27, 14:49
- That's nice ! (nm) - Derek, 2023-10-27, 18:55
- and I found a couple of pics of the Lucifer's Hammer.
- Gary Reeder,
2023-10-27, 15:26
- BMF/ Lucifer's Hammer
- klpflaum,
2023-10-27, 17:42
- Sounds good. (nm) - Gary Reeder, 2023-10-28, 13:27
- Caliber - klpflaum, 2023-10-27, 18:15
- BMF/ Lucifer's Hammer
- klpflaum,
2023-10-27, 17:42
- A better pic of the BMF
- Gary Reeder,
2023-10-27, 14:49
- T/C Contender Frame
- Marco,
2023-10-26, 14:17
- Interested...
- ~JM~,
2023-10-26, 16:32
- So am I brother, so am I ! No idea. (nm) - Marco, 2023-10-27, 03:07
- And please feel free to make an offer....... (nm) - Marco, 2023-10-26, 14:41
- Interested...
- ~JM~,
2023-10-26, 16:32
- I see Mark did some casting yesterday .. as did I.
- Jim Taylor,
2023-10-25, 17:29
- Looking good Jim. (nm) - Mark Conner, 2023-10-25, 19:47
- Hmmmm primer crater
- Paul,
2023-10-25, 15:37
- The bore in the H&R could be a bit tight, causing back
- Gary Reeder,
2023-10-25, 15:59
- What are you sizing your bullets to?
- AlanT,
2023-10-26, 14:20
- Every Ruger .32 I ever had demanded .311-.312” to shoot!
- WB,
2023-10-26, 20:23
- as far back as I remember we always used a .308
- Gary Reeder,
2023-10-27, 12:21
- I built a few revolvers for John Taffin using a .308 - Gary Reeder, 2023-10-27, 12:25
- as far back as I remember we always used a .308
- Gary Reeder,
2023-10-27, 12:21
- 32 cratering
- Carl L,
2023-10-26, 19:18
- New load in a
- Paul,
2023-10-27, 12:07
- 32 cratering... - Carl L, 2023-10-27, 18:29
- New load in a
- Paul,
2023-10-27, 12:07
- Every Ruger .32 I ever had demanded .311-.312” to shoot!
- WB,
2023-10-26, 20:23
- What are you sizing your bullets to?
- AlanT,
2023-10-26, 14:20
- The bore in the H&R could be a bit tight, causing back
- Gary Reeder,
2023-10-25, 15:59
- It is good to see the Broncos and Steelers
- Gary Reeder,
2023-10-25, 14:09
- I recently had one of the Misfits ask if there were
- Gary Reeder,
2023-10-25, 13:42
- Spent a little time yesterday
- Mark Conner,
2023-10-25, 12:46
- That should lower the rock chuck population
- Gary Reeder,
2023-10-25, 13:59
- Nah
- Mark Conner,
2023-10-25, 14:29
- By the look on his face you must have just told him
- Gary Reeder,
2023-10-25, 14:59
- I maybe would have to get him
- Mark Conner,
2023-10-25, 17:02
- Back when I lived in Tennessee I went ground hog
- Gary Reeder,
2023-10-26, 11:20
- We were in Ohio and my grandparents ...
- Jim Taylor,
2023-10-26, 11:31
- I like to not kill any chucks before
- Mark Conner,
2023-10-26, 13:33
- I've had it once, think it was boiled... was very tough - Derek, 2023-10-26, 17:24
- The do gooders here have put a season on - Gary Reeder, 2023-10-26, 15:13
- I like to not kill any chucks before
- Mark Conner,
2023-10-26, 13:33
- We were in Ohio and my grandparents ...
- Jim Taylor,
2023-10-26, 11:31
- Back when I lived in Tennessee I went ground hog
- Gary Reeder,
2023-10-26, 11:20
- I maybe would have to get him
- Mark Conner,
2023-10-25, 17:02
- By the look on his face you must have just told him
- Gary Reeder,
2023-10-25, 14:59
- Nah
- Mark Conner,
2023-10-25, 14:29
- That should lower the rock chuck population
- Gary Reeder,
2023-10-25, 13:59
- From the old Sixgunner.Com site .. Doc O'Meara!
- Jim Taylor,
2023-10-25, 08:19
- Very good Jim. The only thing I have questioned
- Gary Reeder,
2023-10-25, 10:56
- I have heard that also and have never had it explained.
- Jim Taylor,
2023-10-25, 11:48
- Maybe there will be an expert on the Glock on here - Gary Reeder, 2023-10-25, 12:17
- I have heard that also and have never had it explained.
- Jim Taylor,
2023-10-25, 11:48
- Very good Jim. The only thing I have questioned
- Gary Reeder,
2023-10-25, 10:56
- A cartridge to never shoot in an encore
- Gary Reeder,
2023-10-24, 17:47
- Very unfortunate! I have noted the Wby. - WB, 2023-10-24, 19:14
- Wow! Not good. You are OK I take it? (nm)
- Jim Taylor,
2023-10-24, 18:26
- I have never been OK but of all my problems - Gary Reeder, 2023-10-25, 10:59
- When the 6.5 Creedmoor first came out I
- Gary Reeder,
2023-10-23, 14:38
- When the first smokeless high velocity first came out
- Jim Taylor,
2023-10-23, 15:32
- Look at our silhouette shooters shooting at
- Gary Reeder,
2023-10-23, 16:11
- And these shooters had to not only hit the steel
- Gary Reeder,
2023-10-23, 16:16
- Yep! What I meant is it seems like when a new cartrdige
- Jim Taylor,
2023-10-23, 16:18
- When the 300 H&H was introduced it - JFS, 2023-10-24, 16:17
- Because...
- AmBraCol,
2023-10-24, 10:56
- chicken salad out of chicken shit... excellent (nm)
- JFS,
2023-10-24, 12:28
- Remember climbing into a box blind before sunup
- JFS,
2023-10-24, 15:47
- My wife had a Model 600 Remington in .243 ...
- Jim Taylor,
2023-10-24, 17:36
- Those model 600s were great guns. I had one of
- Gary Reeder,
2023-10-25, 12:26
- My wife's did not have the rib or the soft plastic.
- Jim Taylor,
2023-10-25, 13:00
- It looked like this one
- Jim Taylor,
2023-10-25, 13:06
- Here is the one I had.
- Gary Reeder,
2023-10-25, 14:23
- I loved the small bolt and short throw ..
- Jim Taylor,
2023-10-25, 15:21
- If I remember right the gun had the XP-100 action and bolt (nm)
- Gary Reeder,
2023-10-25, 15:44
- Yes. That is true. I never knew which came first.
- Jim Taylor,
2023-10-25, 17:19
- The XP was introduced in '63
- AlanT,
2023-10-28, 12:45
- Aha! Thanks Alan. (nm) - Jim Taylor, 2023-10-28, 14:51
- The XP was introduced in '63
- AlanT,
2023-10-28, 12:45
- Yes. That is true. I never knew which came first.
- Jim Taylor,
2023-10-25, 17:19
- If I remember right the gun had the XP-100 action and bolt (nm)
- Gary Reeder,
2023-10-25, 15:44
- I loved the small bolt and short throw ..
- Jim Taylor,
2023-10-25, 15:21
- Here is the one I had.
- Gary Reeder,
2023-10-25, 14:23
- It looked like this one
- Jim Taylor,
2023-10-25, 13:06
- My wife's did not have the rib or the soft plastic.
- Jim Taylor,
2023-10-25, 13:00
- Those model 600s were great guns. I had one of
- Gary Reeder,
2023-10-25, 12:26
- My wife had a Model 600 Remington in .243 ...
- Jim Taylor,
2023-10-24, 17:36
- Remember climbing into a box blind before sunup
- JFS,
2023-10-24, 15:47
- chicken salad out of chicken shit... excellent (nm)
- JFS,
2023-10-24, 12:28
- Yep! What I meant is it seems like when a new cartrdige
- Jim Taylor,
2023-10-23, 16:18
- And these shooters had to not only hit the steel
- Gary Reeder,
2023-10-23, 16:16
- Look at our silhouette shooters shooting at
- Gary Reeder,
2023-10-23, 16:11
- When the first smokeless high velocity first came out
- Jim Taylor,
2023-10-23, 15:32
- My super trooper
- Joepjs,
2023-10-23, 13:53
- Oh, you mean you wanted it to work? (nm)
- Gary Reeder,
2023-10-23, 14:39
- super trooper - Joepjs, 2023-10-26, 18:14
- Oh, you mean you wanted it to work? (nm)
- Gary Reeder,
2023-10-23, 14:39
- A sincere thank to all...... I know for sure
- JFS,
2023-10-23, 08:53
- Glad to see you are back and above ground. There
- Gary Reeder,
2023-10-23, 16:19
- I think a lot of the Misfits thought you were - Gary Reeder, 2023-10-25, 11:03
- Praise Jesus, glad to hear from you. (nm) - WB, 2023-10-23, 12:59
- So thankful Jesus Christ took care of you. Welcome back. (nm) - SPB, 2023-10-23, 12:18
- Glad you’re back with us James - Howard, 2023-10-23, 09:04
- Glad to see you are back and above ground. There
- Gary Reeder,
2023-10-23, 16:19
- I do have one gun I pulled off that display board in my
- Gary Reeder,
2023-10-21, 15:43
- OK, sort of a Saturday sale here. The Covid
- Gary Reeder,
2023-10-21, 14:29
- lots of folks taking advantage of the Dangerous - Gary Reeder, 2023-10-23, 13:50
- 4" shoulder holster
- cable,
2023-10-23, 09:39
- Harold, remember we are on west coast time
- Gary Reeder,
2023-10-23, 11:09
- Thanks Gary. i had more coffee, woke up - cable, 2023-10-24, 11:23
- Harold, remember we are on west coast time
- Gary Reeder,
2023-10-23, 11:09
- I am getting to this a bit late and hate to put politics on
- Gary Reeder,
2023-10-21, 12:59
- Some don't like him because:
- IC,
2023-10-21, 14:12
- The republicans are going to keep dicking around
- Gary Reeder,
2023-10-21, 15:12
- IT IS WHAT @#$%^&*REPUBLICANS DO! (nm)
- JT,
2023-10-21, 16:10
- John, I can see you are happy with this situation too. (nm) - Gary Reeder, 2023-10-23, 14:40
- True! (nm) - ChrisG, 2023-10-23, 03:57
- IT IS WHAT @#$%^&*REPUBLICANS DO! (nm)
- JT,
2023-10-21, 16:10
- The republicans are going to keep dicking around
- Gary Reeder,
2023-10-21, 15:12
- Some don't like him because:
- IC,
2023-10-21, 14:12
- Granddaughter through surgery all appears well thank you.
- SPB,
2023-10-21, 08:37
- So good to hear! Thank you Lord! (nm) - drdougrx, 2023-10-22, 04:45
- Wonderful ! - Ron Orbeck, 2023-10-21, 10:44
- surgery - Joepjs, 2023-10-21, 10:11
- Excellent! (nm) - Jim Taylor, 2023-10-21, 10:04
- A bit more info on a mid year HHC
- Gary Reeder,
2023-10-20, 17:46
- You guys be thinking about this mid year hunt. I will - Gary Reeder, 2023-10-23, 15:16
- I'm in. (nm) - Marco, 2023-10-21, 17:29
- HHC - FSimon, 2023-10-21, 16:31
- I'm in. (nm) - Winnturner48, 2023-10-21, 15:53
- At this time, Im in! (nm) - Amede, 2023-10-21, 14:20
- sounds good!! (nm) - Brian T, 2023-10-21, 06:03