|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- Thanks to all of you who have served and continue
- jthomson,
2020-11-11, 05:45
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Same to you, Jon. For all that could - Larry Fry, 2020-11-11, 18:41
- Thank you to all that served, God bless. (nm) - bigboar, 2020-11-11, 11:08
- Back at you brothers (nm) - Sid R, 2020-11-11, 08:29
- You too Jon! (nm)
- Tits LaRue,
2020-11-11, 08:12
- Thank you Veterans!! (nm) - Derek, 2020-11-11, 09:12
- Ruger Nylock screws
- Robt,
2020-11-11, 00:12
- Great Question! BUT
- JT,
2020-11-11, 10:33
- Nylock
- Robt,
2020-11-11, 12:02
- HOW DID MUSIC WIRE REPLACE COILS? (nm)
- JT,
2020-11-11, 21:18
- Music wire springs - Robt, 2020-11-12, 16:41
- they found out the springs couldn't carry a tune so.... (nm) - Gary Reeder, 2020-11-11, 12:10
- HOW DID MUSIC WIRE REPLACE COILS? (nm)
- JT,
2020-11-11, 21:18
- Nylock
- Robt,
2020-11-11, 12:02
- Great Question! BUT
- JT,
2020-11-11, 10:33
- Surprising price on an S&W 65
- Howard,
2020-11-10, 18:09
- Wow (nm) - ChrisG, 2020-11-12, 12:39
- the gun isn't worth $1400. Some new people are getting into
- gary reeder,
2020-11-10, 20:47
- That is high, I figured $750-800 was it's sell point
- WB,
2020-11-10, 21:02
- all those features add up to a bit over $350. The gun
- gary reeder,
2020-11-10, 21:42
- I concour. That's the fun of auction. I've seen - WB, 2020-11-10, 22:13
- all those features add up to a bit over $350. The gun
- gary reeder,
2020-11-10, 21:42
- That is high, I figured $750-800 was it's sell point
- WB,
2020-11-10, 21:02
- I was rereading the comment below about the
- Lynn,
2020-11-10, 17:29
- What's you favorite Lever Action Calibers?...
- Huey,
2020-11-10, 16:19
- 22LR and 38 Special (nm) - ChrisG, 2020-11-12, 12:41
- .348 Winchester (nm) - Tom S, 2020-11-12, 04:13
- 50 Alaskan on an1895 frame. Second would have to be 45/70. (nm) - Lymey, 2020-11-11, 19:44
- .32WCF, .308ME, and .45 Colt (nm) - RUSSELL COTTLE, 2020-11-11, 09:50
- I have had 3, - TM, 2020-11-11, 08:29
- Marlin, 45 Colt. (nm) - Tits LaRue, 2020-11-11, 08:14
- I love my Marlins the most. - Sid R, 2020-11-11, 06:29
- 256 Falcon (nm)
- Blake,
2020-11-11, 04:17
- Want (nm) - Amede, 2020-11-11, 06:39
- I'm weird, I like the old .38 WCF - WB, 2020-11-10, 21:06
- MY CHOICE IS EASY
- JT,
2020-11-10, 18:42
- You missed one more
- Ray,
2020-11-11, 13:43
- I forgot I had one of those. What a sweet varmint slammer. (nm) - Sid R, 2020-11-12, 12:25
- NO EXPERIENCE WITH THE .218 BEE (nm) - JT, 2020-11-12, 07:59
- FORGOT .38-55 (nm)
- JT,
2020-11-10, 22:25
- AN .41 MAGNUM. OF THE PISTOL CALIBER CARBINES - JT, 2020-11-10, 22:27
- Also .32-40... (nm)
- azj,
2020-11-10, 19:17
- NO EXPERIENCE WITH THE .32-40 (nm) - JT, 2020-11-12, 07:59
- Yep, .17 HMR too (nm) - azj, 2020-11-10, 19:00
- I know Uberti made 1873s in 44 Special... (nm)
- Huey,
2020-11-10, 18:51
- and uberti made 1866s in 44 spl
- cable,
2020-11-11, 10:51
- I DID + .45 COLT AND .38 SPECIAL (nm) - JT, 2020-11-11, 16:25
- Lever Action - Kevin L. Pflaum, 2020-11-10, 21:32
- and uberti made 1866s in 44 spl
- cable,
2020-11-11, 10:51
- You missed one more
- Ray,
2020-11-11, 13:43
- 45/70 is a good one. 30/30 is the classic choice (nm) - Curt, 2020-11-10, 17:52
- probably what you would expect from a handgunner, but - Gary Reeder, 2020-11-10, 17:19
- M1899 in 300 Savage, Marlin 36 in 32 Win Spc &
- JPL,
2020-11-10, 16:26
- Marlin 357 magnum Looking for another! (nm) - Brant, 2020-11-10, 21:32
- The 38-55 gets my vote. (nm) - Jeff Spencer, 2020-11-10, 16:26
- Winchester 94 30-30 (nm) - Derek, 2020-11-10, 16:21
- "Your Favorite" auto correct gets that wrong every time... (nm)
- Huey,
2020-11-10, 16:20
- .338 Marlin (nm)
- Alcorn,
2020-11-10, 20:50
- 375 Marlin (nm) - Ron Orbeck, 2020-11-11, 12:45
- .338 Marlin (nm)
- Alcorn,
2020-11-10, 20:50
- it didn't take long for Biden to start on the guns
- Gary Reeder,
2020-11-10, 15:16
- Here is the whole link to read.
- Amede,
2020-11-10, 17:05
- read the whole thing - Sunny, 2020-11-10, 19:58
- Remember ... He ain't President until he's sworn in and
- Jim Taylor,
2020-11-10, 16:53
- SHE AIN'T EVEN DRESSED YET! (nm) - JT, 2020-11-10, 18:35
- I pray that the court system - John W, 2020-11-10, 17:01
- Gonna be hard to get thru the Senate
- Dave H.,
2020-11-10, 15:23
- Grid lock is a good thing. I do have some hope
- John W,
2020-11-10, 15:53
- Gridlock ?
- Dave H.,
2020-11-11, 11:15
- some of us (me included) don't understand the - Gary Reeder, 2020-11-11, 15:47
- Agreed... gridlock is good. They are not value added (nm) - Curt, 2020-11-10, 17:54
- Gridlock ?
- Dave H.,
2020-11-11, 11:15
- Grid lock is a good thing. I do have some hope
- John W,
2020-11-10, 15:53
- Here is the whole link to read.
- Amede,
2020-11-10, 17:05
- 9MM: FOR THE PAST SEVERAL YEARS I HAVE
- JT,
2020-11-10, 14:50
- thru the years we have bought, traded for and been given - Gary Reeder, 2020-11-10, 15:10
- I to kept my brass too...just in case. (nm) - Sid R, 2020-11-10, 14:58
- custom TC barrels in stock
- Gary Reeder,
2020-11-10, 13:59
- Gary, if the 475 LB is still available I'll takeit. (nm) - JPL, 2020-11-11, 10:44
- Larry Hanssen bought 310 & 378 (nm) - Colleen Reeder, 2020-11-10, 14:55
- I need you guys to forgive me and pray for me.
- Jim Taylor,
2020-11-10, 12:16
- SOMETHINGS ARE VERY HARD TO FORGIVE OR FORGET! (nm)
- JT,
2020-11-10, 18:37
- some of my hard core Southern relatives still say - Gary Reeder, 2020-11-11, 15:51
- funny-thanks (nm) - Lynn, 2020-11-10, 17:16
- Did it have a fuzzy cup holder for your latte? - John W, 2020-11-10, 15:25
- Just LMAO (nm) - Sid R, 2020-11-10, 14:04
- Just sad (nm)
- Suinny,
2020-11-10, 13:44
- laughing to hard, added an i (nm) - Sunny, 2020-11-10, 14:04
- Your a better man than I. Just couldn’t do it. (nm) - MTM, 2020-11-10, 12:31
- that will be 10 hail Marys. (nm)
- Gary Reeder,
2020-11-10, 12:17
- if it had a Biden sticker on it, 20 Hail Marys (nm)
- Gary Reeder,
2020-11-10, 14:01
- No. Thankfully the lady is a conservative. (nm) - Jim Taylor, 2020-11-10, 14:17
- Cast 1000 bullets and do a donut in your pickup for penance (nm) - Howard, 2020-11-10, 12:54
- Hail yes! (nm)
- Jim Taylor,
2020-11-10, 12:21
- Oh no! Did you wear a mask? Maybe no one saw you?! (nm)
- WB,
2020-11-10, 12:26
- A Prius will not start without a mask! (nm)
- Brant,
2020-11-10, 13:19
- I could start the *&%$$ thing.
- Jim Taylor,
2020-11-10, 13:41
- COULDN'T START IT .... - Jim Taylor, 2020-11-10, 13:42
- I could start the *&%$$ thing.
- Jim Taylor,
2020-11-10, 13:41
- A Prius will not start without a mask! (nm)
- Brant,
2020-11-10, 13:19
- Oh no! Did you wear a mask? Maybe no one saw you?! (nm)
- WB,
2020-11-10, 12:26
- if it had a Biden sticker on it, 20 Hail Marys (nm)
- Gary Reeder,
2020-11-10, 14:01
- SOMETHINGS ARE VERY HARD TO FORGIVE OR FORGET! (nm)
- JT,
2020-11-10, 18:37
- Bert & Ernie come by most every day ...
- Jim Taylor,
2020-11-10, 11:11
- Black-headed Vultures ... (nm)
- Jim Taylor,
2020-11-10, 11:14
- AKA Democrats (nm) - Gary Reeder, 2020-11-10, 12:16
- Black-headed Vultures ... (nm)
- Jim Taylor,
2020-11-10, 11:14
- My Favorite Levergun Cartridge
- Jim Taylor,
2020-11-10, 08:27
- My 41 mag Henry (nm)
- Lynn,
2020-11-10, 17:17
- I had a Marlin in .41 Magnum. That was a sweet gun. (nm) - Jim Taylor, 2020-11-10, 19:11
- My favorite is the Marlin 45-70 guide gun - Larry Fry, 2020-11-10, 16:50
- AND FOR EASY SHOOTING A 150 CAST
- JT,
2020-11-10, 09:53
- The other day I was shooting 125 gr. AK47 bullets - Jim Taylor, 2020-11-10, 10:01
- I've always hunted thickets and thick underbrush in - Sid R, 2020-11-10, 09:46
- I’m somewhat of an oddity..
- John W,
2020-11-10, 09:41
- Paco Kelly asked the question ... - Jim Taylor, 2020-11-10, 09:46
- It was my first hunting rifle and I hated it.
- Amede,
2020-11-10, 09:17
- 30-30 - David R, 2020-11-10, 11:53
- It modernizes pretty well too. In my Ruger #1....
- Huey,
2020-11-10, 09:27
- You bet! And in the bolt action rifles it works too! (nm)
- Jim Taylor,
2020-11-10, 09:47
- Always wanted a Remington 788, but never happened... (nm)
- Huey,
2020-11-10, 10:18
- Didn't Savage make some also? I remember
- Amede,
2020-11-10, 11:18
- Had a couple Savage 340s. They shoot ok, but....
- Huey,
2020-11-10, 11:20
- My brother had a Savage .30-30 in Akley Improved ... (nm)
- Jim Taylor,
2020-11-10, 11:48
- Don't forget the Savage M170 pump, ugly gun. But works. (nm)
- WB,
2020-11-10, 12:06
- I think my Savage 170 is one of the sweetest woods gun made (nm)
- james,
2020-11-10, 12:37
- There is just something about a pump rifle
- WB,
2020-11-10, 14:45
- Really like my Remington 141 35 Rem. (nm) - Derek, 2020-11-10, 18:07
- There is just something about a pump rifle
- WB,
2020-11-10, 14:45
- I think my Savage 170 is one of the sweetest woods gun made (nm)
- james,
2020-11-10, 12:37
- Don't forget the Savage M170 pump, ugly gun. But works. (nm)
- WB,
2020-11-10, 12:06
- My brother had a Savage .30-30 in Akley Improved ... (nm)
- Jim Taylor,
2020-11-10, 11:48
- Had a couple Savage 340s. They shoot ok, but....
- Huey,
2020-11-10, 11:20
- Didn't Savage make some also? I remember
- Amede,
2020-11-10, 11:18
- Always wanted a Remington 788, but never happened... (nm)
- Huey,
2020-11-10, 10:18
- You bet! And in the bolt action rifles it works too! (nm)
- Jim Taylor,
2020-11-10, 09:47
- Ain't that the truth? Wisdom! (nm) - Jim Taylor, 2020-11-10, 09:19
- I took my first and second deer with the Win 94...
- John Ammeter,
2020-11-10, 08:36
- 94
- Rw,
2020-11-10, 20:10
- case separations
- degoins,
2020-11-11, 07:09
- not sure what caused it but extremely hot loads - Gary Reeder, 2020-11-11, 15:59
- case separations
- degoins,
2020-11-11, 07:09
- 94
- Rw,
2020-11-10, 20:10
- My 41 mag Henry (nm)
- Lynn,
2020-11-10, 17:17
- Elk hit in Kansas?
- SPB,
2020-11-10, 08:02
- Elk in Kansas - TM, 2020-11-10, 11:10
- Who was Alonzo Crull?
- WB,
2020-11-09, 19:27
- Alonzo Crull - Dave Shively, 2021-01-10, 17:49
- Found one for sale
- Tits LaRue,
2020-11-10, 08:09
- looks like a toy gun a kid would get for
- Gary Reeder,
2020-11-10, 12:29
- I've been watching this one on GB
- WB,
2020-11-10, 15:34
- The link.... - WB, 2020-11-10, 15:34
- I've been watching this one on GB
- WB,
2020-11-10, 15:34
- looks like a toy gun a kid would get for
- Gary Reeder,
2020-11-10, 12:29
- i found this looks like he did 22rf converanssions
- carl hackney,
2020-11-10, 06:39
- Thanks Carl, that may have been me back in 2010! - WB, 2020-11-10, 08:12
- I don't know much - PJ, 2020-11-09, 22:20
- I have no clue. (nm) - ChrisG, 2020-11-09, 22:14
- 30 GNR Carbine's first hunt.
- Gus S.,
2020-11-09, 18:38
- Congrats, nice trophy. (nm) - Amede, 2020-11-10, 09:20
- Congratulations! (nm) - Russell Cottle, 2020-11-10, 08:15
- Nuce buck! (nm) - Derek, 2020-11-10, 05:23
- Congrats ,that’s good stuff (nm) - Blake, 2020-11-10, 04:56
- Excellent. (nm) - John W, 2020-11-10, 03:11
- the 30 GNR has been a favorite since around
- gary reeder,
2020-11-09, 21:22
- That 30GNR definitely gets it done. - Gus S., 2020-11-10, 07:24
- Nothing wrong with that boy, nice shooting. (nm) - Andy Sc, 2020-11-09, 18:59
- Nice looking animal, Congrats! (nm)
- JPL,
2020-11-09, 18:52
- Very nice deer! Try Nosler Balistic tip ,
- Alcorn,
2020-11-10, 05:22
- Nosler BTs. I have some 125s - Gus S., 2020-11-10, 07:01
- Very nice deer! Try Nosler Balistic tip ,
- Alcorn,
2020-11-10, 05:22
- Now what?
- F.Simon,
2020-11-09, 08:44
- Noah's Ark
- Ray Shepard,
2020-11-09, 12:50
- Ray is right and don't let what may happen in
- Gary Reeder,
2020-11-09, 12:58
- Now what? - F.Simon, 2020-11-09, 13:24
- Ray is right and don't let what may happen in
- Gary Reeder,
2020-11-09, 12:58
- For me ...
- Jim Taylor,
2020-11-09, 08:53
- From a true Spiritual wisdom that is wonderful. - WB, 2020-11-09, 09:01
- Getting credible information is problematic
- WB,
2020-11-09, 08:50
- it has always amazed me how most gun manufacturers - Gary Reeder, 2020-11-09, 12:30
- Scotty, I have deleted my Facebook
- Larry Fry,
2020-11-09, 09:19
- Someone needs to keep an eye on the enemy! (nm)
- WB,
2020-11-09, 09:57
- LOL...... Tango in motion!!! To the devil - Larry Fry, 2020-11-09, 10:12
- Someone needs to keep an eye on the enemy! (nm)
- WB,
2020-11-09, 09:57
- Noah's Ark
- Ray Shepard,
2020-11-09, 12:50
- High Standard update
- MWC,
2020-11-09, 01:05
- Great! There is always great anexitey and caution - WB, 2020-11-09, 08:44
- Sunday afternoon reloading
- Brent Clark,
2020-11-08, 19:59
- Brent, have you checked the OAL of that cartridge with those
- Gary Reeder,
2020-11-09, 12:47
- Measurements
- Brent Clark,
2020-11-09, 15:49
- very good. Sorry for the hassle but I have loaded a bunch
- Gary Reeder,
2020-11-09, 16:38
- No problem. Thanks for watching out (nm) - Brent Clark, 2020-11-09, 17:43
- very good. Sorry for the hassle but I have loaded a bunch
- Gary Reeder,
2020-11-09, 16:38
- Measurements
- Brent Clark,
2020-11-09, 15:49
- What bullet are you loading in those photos
- jthomson,
2020-11-09, 04:46
- Xtreme Bullets - Brent Clark, 2020-11-09, 10:09
- Look like plated (nm) - Darryl T., 2020-11-09, 08:20
- Same thought .... - David R, 2020-11-08, 20:44
- Brent, have you checked the OAL of that cartridge with those
- Gary Reeder,
2020-11-09, 12:47
- G2 and Encore frames
- MTM,
2020-11-08, 18:55
- the original G2 frames seem to fit more barrels than the
- gary reeder,
2020-11-08, 21:38
- So all G2 Frames are good, older ones fit more barrels (nm)
- MTM,
2020-11-09, 09:12
- in my experience, yes (nm) - Gary Reeder, 2020-11-09, 11:55
- So all G2 Frames are good, older ones fit more barrels (nm)
- MTM,
2020-11-09, 09:12
- Encore and g2 - Mike horn, 2020-11-08, 20:14
- the original G2 frames seem to fit more barrels than the
- gary reeder,
2020-11-08, 21:38
- Grip Replacement
- Randy Barnett,
2020-11-08, 13:33
- I love you Randy but that MR grip...
- WB,
2020-11-09, 08:57
- watch it shitbird. That grip design is one of mine
- Gary Reeder,
2020-11-09, 11:59
- Honestly, not playing favorites, yours looks much
- WB,
2020-11-09, 12:32
- thank you. I won't tell anyone that this is one of your
- Gary Reeder,
2020-11-09, 12:52
- I thought I saw a Putty Cat... (nm) - WB, 2020-11-09, 13:50
- thank you. I won't tell anyone that this is one of your
- Gary Reeder,
2020-11-09, 12:52
- Honestly, not playing favorites, yours looks much
- WB,
2020-11-09, 12:32
- watch it shitbird. That grip design is one of mine
- Gary Reeder,
2020-11-09, 11:59
- That green laminate really sets it off (nm) - MTM, 2020-11-08, 17:50
- Looks great! (nm) - Derek, 2020-11-08, 16:34
- Magnum Research did a good job of copying our - gary reeder, 2020-11-08, 13:48
- I love you Randy but that MR grip...
- WB,
2020-11-09, 08:57
- Looking for 280 and 440GNR barrels.
- Larryh,
2020-11-08, 11:58
- 280 BBL
- Tracy M,
2020-11-08, 16:36
- correct email.... - Tracy M, 2020-11-08, 17:39
- I have an extra 14” 280 GNR barrel, let me
- Sean Harper,
2020-11-08, 16:00
- No go, I must have already gotten rid of it?? (nm) - Sean Harper, 2020-11-08, 16:16
- I enjoy both. The .280 has a ferocious - WB, 2020-11-08, 12:30
- Encore or G2, carbine or handgun... (nm) - Larryh, 2020-11-08, 12:00
- 280 BBL
- Tracy M,
2020-11-08, 16:36
- High Standard ???
- MWC,
2020-11-08, 11:40
- Please keep us tied in Mark, friend has similar issues and - SPB, 2020-11-08, 13:29
- I assume these are live rounds? Did the cylinder swing out - gary reeder, 2020-11-08, 13:25
- Just be careful, a rimfire has two sides that mash. (nm) - WB, 2020-11-08, 12:33
- Did a little cold blueing on the Model 10 Project Gun
- Jim Taylor,
2020-11-08, 09:58
- I like it, the RB makes it a little unique - WB, 2020-11-08, 12:20
- Got the ol' girl presentable. (nm) - Russell Cottle, 2020-11-08, 10:15
- 257 GNR with Garys ok
- Sunny,
2020-11-08, 09:21
- Sold to Jack S. (nm) - Sunny, 2020-11-08, 17:57
- 257 gnr
- jack s,
2020-11-08, 14:37
- yes it is available - Sunny, 2020-11-08, 17:18
- it’s for an encore? it looks like that’s on the barrel (nm)
- MTM,
2020-11-08, 10:12
- yep forgot Encore - Sunny, 2020-11-08, 10:58
- Doug the Plumber who once hunted HHC
- WB,
2020-11-08, 08:07
- Great trophy and good eats. Way to go. (nm) - Andy S, 2020-11-08, 10:31
- Congratulations granddaughter! That is excellent. (nm) - DinCA, 2020-11-08, 09:04
- Good job little sister! (nm)
- Brant,
2020-11-08, 08:56
- Excellent shooting (nm) - Charles, 2020-11-08, 09:51
- Another successful hunt for Brant's Great Nephew...
- Huey,
2020-11-07, 16:29
- That's great! Looks like an illuminating lazer on the side. - WB, 2020-11-08, 07:54
- Excellent (nm) - John W, 2020-11-08, 03:07
- Awesome! (nm) - Derek, 2020-11-07, 20:56
- Love the thumbs up! (nm) - Andy S, 2020-11-07, 20:42
- That’s so awesome (nm) - Blake, 2020-11-07, 19:18
- what sort of scope is that? (nm)
- gary reeder,
2020-11-07, 19:04
- this is all I know - Brant, 2020-11-07, 22:24
- I'm going to guess as they're popular here... - Huey, 2020-11-07, 19:33
- hog hunting
- stonecold,
2020-11-07, 16:36
- This is over the top congrats (nm) - Charles, 2020-11-08, 09:50